Dugan
Brandon
Dugan
Brandon
No Thumbnail Available
Search Results
Now showing
1 - 6 of 6
-
ArticleInfluence of late Pleistocene glaciations on the hydrogeology of the continental shelf offshore Massachusetts, USA(John Wiley & Sons, 2014-12-05) Siegel, Jacob ; Person, Mark ; Dugan, Brandon ; Cohen, Denis ; Lizarralde, Daniel ; Gable, CarlMultiple late Pleistocene glaciations that extended onto the continental shelf offshore Massachusetts, USA, may have emplaced as much as 100 km3 of freshwater (salinity <5 ppt) in continental shelf sediments. To estimate the volume and extent of offshore freshwater, we developed a three-dimensional, variable-density model that couples fluid flow and heat and solute transport for the continental shelf offshore Massachusetts. The stratigraphy for our model is based on high-resolution, multichannel seismic data. The model incorporates the last 3 Ma of climate history by prescribing boundary conditions of sea level change and ice sheet extent and thickness. We incorporate new estimates of the maximum extent of a late Pleistocene ice sheet to near the shelf-slope break. Model results indicate that this late Pleistocene ice sheet was responsible for much of the emplaced freshwater. We predict that the current freshwater distribution may reach depths up to 500 meters below sea level and up to 30 km beyond Martha's Vineyard. The freshwater distribution is strongly dependent on the three-dimensional stratigraphy and ice sheet history. Our predictions improve our understanding of the distribution of offshore freshwater, a potential nonrenewable resource for coastal communities along recently glaciated margins.
-
ArticleIce sheet–derived submarine groundwater discharge on Greenland's continental shelf(American Geophysical Union, 2011-07-28) DeFoor, Whitney ; Person, Mark ; Larsen, Hans Christian ; Lizarralde, Daniel ; Cohen, Denis ; Dugan, BrandonIsotopically light (−1‰ to −8‰ δ18O) and fresh pore fluids (300–520 mM Cl−) were found in continental shelf sediments up to 100 km offshore of southeastern (SE) Greenland, suggesting infiltration and mixing of ice sheet meltwater with seawater to depths of 260 m. These geochemical anomalies may be associated with ice sheet–derived submarine groundwater discharge (SMGD). We present a continental-scale reconstruction of the late Pleistocene hydrogeology of SE Greenland using finite element analysis that incorporates ice sheet loading and solute and isotope transport. Results indicate that subglacial infiltration and SMGD are of the same order of magnitude and are highly dependent on the permeability of the subaerial basalt. Simulated infiltration and SMGD almost doubled during the Last Glacial Maximum, compared to ice-free conditions. Much of the present-day glacially induced groundwater discharge occurs on land. Subice infiltration on the continental shelf likely represents a mixture of seawater and meltwater during past glacial maximums. Simulated SMGD during the most recent interval of glacial retreat is about 4% of the total ice sheet melting. At present, the simulated rate of SMGD is about 11% of the estimated current melting rate.
-
ArticlePhysical properties of sediments from Keathley Canyon and Atwater Valley, JIP Gulf of Mexico gas hydrate drilling program(Elsevier B.V., 2008-05-18) Winters, William J. ; Dugan, Brandon ; Collett, Timothy S.Physical property measurements and consolidation behavior are different between sediments from Atwater Valley and Keathley Canyon in the northern Gulf of Mexico. Void ratio and bulk density of Atwater Valley sediment from a seafloor mound (holes ATM1 and ATM2) show little effective stress (or depth) dependence to 27 meters below seafloor (mbsf), perhaps owing to fluidized transport through the mound itself with subsequent settling onto the seafloor or mound flanks. Off-mound sediments (hole AT13-2) have bulk physical properties that are similar to mound sediments above 27 mbsf, but void ratio and porosity decrease below that depth. Properties of shallow (<50 mbsf) Keathley Canyon sediments (KC151-3) change with increasing effective stress (or depth) compared to Atwater Valley, but vary little below that depth. Organic carbon is present in concentrations between typical near-shore and deep-sea sediments. Organic carbon-to-nitrogen ratios suggest that the organic matter contained in Atwater Valley off-mound and mound sites came from somewhat different sources. The difference in organic carbon-to-nitrogen ratios between Atwater Valley and Keathley Canyon is more pronounced. At Keathley Canyon a more terrigenous source of the organic matter is indicated. Grain sizes are typically silty clay or clay within the two basins reflecting similar transport energy. However, the range in most shallow sediment properties is significantly different between the two basins. Bulk density profiles agree with logging results in Atwater Valley and Keathley Canyon. Agreement between lab-derived and logging-derived properties supports using logging data to constrain bulk physical properties where cores were not collected.
-
ArticleOffshore freshened groundwater in continental margins(American Geophysical Union, 2020-11-20) Micallef, Aaron ; Person, Mark ; Berndt, Christian ; Bertoni, Claudia ; Cohen, Denis ; Dugan, Brandon ; Evans, Rob L. ; Haroon, Amir ; Hensen, Christian ; Jegen, Marion ; Key, Kerry ; Kooi, Henk ; Liebetrau, Volker ; Lofi, Johanna ; Mailloux, Brian J. ; Martin-Nagle, Renée ; Michael, Holly A. ; Müller, Thomas ; Schmidt, Mark ; Schwalenberg, Katrin ; Trembath-Reichert, Elizabeth ; Weymer, Bradley ; Zhang, Yipeng ; Thomas, Ariel T.First reported in the 1960s, offshore freshened groundwater (OFG) has now been documented in most continental margins around the world. In this review we compile a database documenting OFG occurrences and analyze it to establish the general characteristics and controlling factors. We also assess methods used to map and characterize OFG, identify major knowledge gaps, and propose strategies to address them. OFG has a global volume of 1 × 106 km3; it predominantly occurs within 55 km of the coast and down to a water depth of 100 m. OFG is mainly hosted within siliciclastic aquifers on passive margins and recharged by meteoric water during Pleistocene sea level lowstands. Key factors influencing OFG distribution are topography-driven flow, salinization via haline convection, permeability contrasts, and the continuity/connectivity of permeable and confining strata. Geochemical and stable isotope measurements of pore waters from boreholes have provided insights into OFG emplacement mechanisms, while recent advances in seismic reflection profiling, electromagnetic surveying, and numerical models have improved our understanding of OFG geometry and controls. Key knowledge gaps, such as the extent and function of OFG, and the timing of their emplacement, can be addressed by the application of isotopic age tracers, joint inversion of electromagnetic and seismic reflection data, and development of three-dimensional hydrological models. We show that such advances, combined with site-specific modeling, are necessary to assess the potential use of OFG as an unconventional source of water and its role in sub-seafloor geomicrobiology.
-
ArticleGlacially generated overpressure on the New England continental shelf : integration of full-waveform inversion and overpressure modeling(John Wiley & Sons, 2014-04-29) Siegel, Jacob ; Lizarralde, Daniel ; Dugan, Brandon ; Person, MarkLocalized zones of high-amplitude, discontinuous seismic reflections 100 km off the coast of Massachusetts, USA, have P wave velocities up to 190 m/s lower than those of adjacent sediments of equal depth (250 m below the sea floor). To investigate the origin of these low-velocity zones, we compare the detailed velocity structure across high-amplitude regions to adjacent, undisturbed regions through full-waveform inversion. We relate the full-waveform inversion velocities to effective stress and overpressure with a power law model. This model predicts localized overpressures up to 2.2 MPa associated with the high-amplitude reflections. To help understand the overpressure source, we model overpressure due to erosion, glacial loading, and sedimentation in one dimension. The modeling results show that ice loading from a late Pleistocene glaciation, ice loading from the Last Glacial Maximum, and rapid sedimentation contributed to the overpressure. Localized overpressure, however, is likely the result of focused fluid flow through a high-permeability layer below the region characterized by the high-amplitude reflections. These high overpressures may have also caused localized sediment deformation. Our forward models predict maximum overpressure during the Last Glacial Maximum due to loading by glaciers and rapid sedimentation, but these overpressures are dissipating in the modern, low sedimentation rate environment. This has important implications for our understanding continental shelf morphology, fluid flow, and submarine groundwater discharge off Massachusetts, as we show a mechanism related to Pleistocene ice sheets that may have created regions of anomalously high overpressure.
-
ArticlePhysical properties of hydrate-bearing sediments(American Geophysical Union, 2009-12-31) Waite, William F. ; Santamarina, J. Carlos ; Cortes, Douglas D. ; Dugan, Brandon ; Espinoza, D. N. ; Germaine, J. ; Jang, J. ; Jung, J. W. ; Kneafsey, Timothy J. ; Shin, H. ; Soga, K. ; Winters, William J. ; Yun, Tae SupMethane gas hydrates, crystalline inclusion compounds formed from methane and water, are found in marine continental margin and permafrost sediments worldwide. This article reviews the current understanding of phenomena involved in gas hydrate formation and the physical properties of hydrate-bearing sediments. Formation phenomena include pore-scale habit, solubility, spatial variability, and host sediment aggregate properties. Physical properties include thermal properties, permeability, electrical conductivity and permittivity, small-strain elastic P and S wave velocities, shear strength, and volume changes resulting from hydrate dissociation. The magnitudes and interdependencies of these properties are critically important for predicting and quantifying macroscale responses of hydrate-bearing sediments to changes in mechanical, thermal, or chemical boundary conditions. These predictions are vital for mitigating borehole, local, and regional slope stability hazards; optimizing recovery techniques for extracting methane from hydrate-bearing sediments or sequestering carbon dioxide in gas hydrate; and evaluating the role of gas hydrate in the global carbon cycle.