Development of the BASS rake acoustic current sensor : measuring velocity in the continental shelf wave bottom boundary layer
Development of the BASS rake acoustic current sensor : measuring velocity in the continental shelf wave bottom boundary layer
Date
1997-06
Authors
Morrison, Archie T.
Linked Authors
Person
Alternative Title
Citable URI
As Published
Date Created
Location
DOI
10.1575/1912/5705
Related Materials
Replaces
Replaced By
Keywords
Oceanographic instruments
Boundary layer
Boundary layer
Abstract
Surface swell over the continental shelf generates a sheet of oscillatory shear flow at
the base of the water column, the continental shelf wave bottom boundary layer. The
short periods of surface swell sharply limit the thickness of the wave boundary layer,
confining it to a thin region below an oscillatory, but essentially irrotational, core. For
a wide range of shelf conditions, the vertical extent of the wave boundary layer does
not exceed 2.5 cm and is commonly less. The extreme narrowness of this boundary
layer is responsible for high levels of bottom stress and turbulent dissipation. Even in
relatively mild sea states, the wave induced bottom shear stress can be sufficient to
initiate sediment motion. The wave bottom boundary layer plays an important role
in the processes of sediment entrainment and transport on the continental margins.
This thesis documents the development, testing, and field use of a new instrument,
the BASS Rake, designed to measure velocity profiles in the wave boundary layer.
The mechanical design supports multiple measurement levels with millimeter vertical
spacing. The mechanical design is integrated with an electronic interface designed to
permit flexible acquisition of a suite of horizontal and vertical velocity measurements
without sacrificing the electronic characteristics necessary for high measurement accuracy. The effects of velocity averaging over the sample volume are calculated with
a model of acoustic propagation in a scattering medium appropriate to the scales of
a single differential travel time axis. A simpler parametric model of the averaging
process is then developed and used to specify the transducer characteristics necessary
to image the wave boundary layer on the continental shelf.
A flow distortion model for the sensor head is developed and the empirical determinations
of the Reynolds number, Keulegan-Carpenter number, and angular dependencies
of the sensor response for the laboratory and field prototypes is presented.
The calibrated sensor response of the laboratory prototype is tested against concurrent
LDV measurements over a natural sand bed in a flume. The single measurement
accuracy of the BASS Rake is higher than that of the LDV and the multiple sample volumes confer other advantages. For example, the ability of the BASS Rake to image
vertically coherent turbulent instabilities, invisible to the LDV, is demonstrated.
Selected data from a twenty-four day field deployment outside the surf zone of a local
beach are presented and analyzed. The data reveal regular reworking of the sand
bed, the generation and modification of sand ripples, and strong tidal modulation of
the current and wave velocities on semi-diurnal, diurnal, and spring/neap time scales.
The data set is unique in containing concurrent velocity time series, of several weeks
duration, with coverage from 1 cm to 20 cm above the bottom.
Description
Submitted in partial fulfillment of the requirements for the degree of Doctor of Philosophy at the Massachusetts Institute of Technology and the Woods Hole Oceanographic Institution June 1997
Embargo Date
Citation
Morrison, A. T. (1997). Development of the BASS rake acoustic current sensor : measuring velocity in the continental shelf wave bottom boundary layer [Doctoral thesis, Massachusetts Institute of Technology and Woods Hole Oceanographic Institution]. Woods Hole Open Access Server. https://doi.org/10.1575/1912/5705