Montesi Laurent G. J.

Last Name

Montesi

First Name

Laurent G. J.

Full item page

Search Results

Now showing 1 - 10 of 10

Mantle flow and melting underneath oblique and ultraslow mid-ocean ridges

(American Geophysical Union, 2007-12-25) Montesi, Laurent G. J. ; Behn, Mark D.

Mid-ocean ridge morphology correlates strongly with spreading rate. As the spreading rate decreases, conductive cooling becomes more important in controlling ridge thermal structure and the axial lithosphere thickens. At ultraslow spreading rates, the ridge axis becomes sufficiently cold that peridotite blocks are emplaced directly at the seafloor and volcanism is limited to localized volcanic centers widely spaced along the ridge axis. Some slow-spreading ridges adopt an ultraslow morphology when their axis is oblique to the spreading direction. We present an analytical solution for mantle flow beneath an oblique ridge and demonstrate that the thermal structure and crustal thickness are controlled by the effective spreading rate (product of the plate separation velocity and the cosine of obliquity). A global compilation of oblique ridges reveals that ultraslow morphology corresponds to effective half rates less than 6.5 mm/yr, resulting in lithosphere that is thicker than ~30 km. We conclude that the transition from slow to ultraslow spreading is not related to a change of melt productivity but rather in the efficiency of vertical melt extraction.
Distributed deformation ahead of the Cocos-Nazca Rift at the Galapagos triple junction

(American Geophysical Union, 2011-11-08) Smith, Deborah K. ; Schouten, Hans A. ; Zhu, Wenlu ; Montesi, Laurent G. J. ; Cann, Johnson R.

The Galapagos triple junction is not a simple ridge-ridge-ridge (RRR) triple junction. The Cocos-Nazca Rift (C-N Rift) tip does not meet the East Pacific Rise (EPR). Instead, two secondary rifts form the link: Incipient Rift at 2°40′N and Dietz Deep volcanic ridge, the southern boundary of the Galapagos microplate (GMP), at 1°10′N. Recently collected bathymetry data are used to investigate the regional tectonics prior to the establishment of the GMP (∼1.5 Ma). South of C-N Rift a band of northeast-trending cracks cuts EPR-generated abyssal hills. It is a mirror image of a band of cracks previously identified north of C-N Rift on the same age crust. In both areas, the western ends of the cracks terminate against intact abyssal hills suggesting that each crack initiated at the EPR spreading center and cut eastward into pre-existing topography. Each crack formed a short-lived triple junction until it was abandoned and a new crack and triple junction initiated nearby. Between 2.5 and 1.5 Ma, the pattern of cracking is remarkably symmetric about C-N Rift providing support for a crack interaction model in which crack initiation at the EPR axis is controlled by stresses associated with the tip of the westward-propagating C-N Rift. The model also shows that offsets of the EPR axis may explain times when cracking is not symmetric. South of C-N Rift, cracks are observed on seafloor as old as 10.5 Ma suggesting that this triple junction has not been a simple RRR triple junction during that time.
The recent history of the Galapagos Triple Junction preserved on the Pacific plate

( 2013-04) Smith, Deborah K. ; Schouten, Hans A. ; Montesi, Laurent G. J. ; Zhu, Wenlu

At the Galapagos triple junction, the Cocos and Nazca plates are broken by a succession of transient rifts north and south of the Cocos-Nazca (C-N) Rift. Modeling has suggested that each rift initiated at the East Pacific Rise (EPR), its location controlled by the distance of the C-N Rift tip from the EPR. Evidence on the Pacific plate confirms that each transient rift formed a true RRR triple junction with the EPR and clarifies the history of the region. At ~1.5 Ma the triple junctions began jumping rapidly toward C-N Rift suggesting that the C-N Rift tip moved closer to the EPR. Pacific abyssal hills became broad and shallow indicating enhanced magma supply to the region. At ~1.4 Ma, the Galapagos microplate developed when extension became fixed on the southern transient rift to form the South scarp of the future Dietz rift basin. Lavas flooded the area and a Galapagos-Nazca magmatic spreading center initiated at the EPR. We suggest that a hotspot was approaching the southern triple junction from the west. The hotspot crossed to the Nazca plate ~1.25 Ma. Dietz seamount formed within the young spreading center, dikes intruded Dietz rift basin, and eruptions built volcanic ridges. Since ~0.8 Ma magmatic spreading has jumped northward twice, most recently to Dietz volcanic ridge. Amagmatic extension to the east has formed the large North scarp of Dietz rift basin. Northward jumping of the southern triple junction has maintained the microplate boundary close to the proposed hotspot.
A constitutive model for layer development in shear zones near the brittle-ductile transition

(American Geophysical Union, 2007-04-27) Montesi, Laurent G. J.

The microstructure of ductile shear zones differs from that of surrounding wall rocks. In particular, compositional layering is a hallmark of shear zones. As layered rocks are weaker than their isotropic protolith when loaded in simple shear, layering may hold the key to explain localization of ductile deformation onto ductile shear zones. I propose here a constitutive model for layer development. A two-level mixing theory allows the strength of the aggregate to be estimated at intermediate degrees of layering. A probabilistic failure model is introduced to control how layers develop in a deforming aggregate. This model captures one of the initial mechanism of phase interconnection identified experimentally by Holyoke and Tullis (2006a, 2006b), fracturing of load bearing grains. This model reproduces the strength evolution of these experiments and can now be applied to tectonic modeling.
Faulting and volcanism in the axial valley of the slow-spreading center of the Mariana back arc basin from Wadatsumi side-scan sonar images

(American Geophysical Union, 2005-05-13) Deschamps, Anne ; Fujiwara, Toshiya ; Asada, Miho ; Montesi, Laurent G. J. ; Gente, Pascal

We analyzed in detail the geology of the median valley floor of the Mariana Basin slow-spreading ridge using sea surface geophysical data and a high-resolution deep-tow side-scan sonar survey over one spreading segment. Analysis of surface magnetic data indicates highly asymmetric accretion, with the half-spreading rate on the western side of the basin being two to three times larger than on the eastern side. Surface magnetic and reflectivity data together suggest that asymmetric spreading is accomplished through eastward ridge jumps of ∼10 km of amplitude. Deep-tow backscatter data indicate along-axis variations of the volcanic processes with the emplacement of smooth and hummocky flows at the segment center and end, respectively. This variation likely relates to changes in the effusion rate due to the deepening or even disappearance of the magma chamber toward the segment end. Concerning tectonic processes, we find a power law distribution of the fractures, with an exponent of 1.74. This suggests that within the inner valley floor, fracture growth prevails over fracture nucleation and coalescence and that fractures accommodate less than 8% of the strain. According to our calculation based on a ratio of 0.02 to 0.03 between the vertical displacement and the length of faults, the amount of tectonic strain accommodated in the inner valley floor would consistently be ∼1.1–3.4%. Data also show two distinct sets of fractures. One trend is parallel to the rift direction at the segment center (∼N160°E) and perpendicular to the plate separation direction. Another set trends ∼17° oblique to this direction (∼N175°E) and is located over the eastern part of the valley, in the vicinity of a major bounding fault also trending ∼N175°E, that is, obliquely to the direction of plate motion. We modeled the stress field near a major fault that is oblique to the regional stress field associated with plate separation using a three-dimensional boundary element approach. We found that the orientation of the predicted fissuring near the oblique fault is locally rotated by ∼15° due to a flexure of the bending plate close to this fault.
A probabilistic damage model of stress-induced permeability anisotropy during cataclastic flow

(American Geophysical Union, 2007-10-20) Zhu, Wenlu ; Montesi, Laurent G. J. ; Wong, Teng-fong

A fundamental understanding of the effect of stress on permeability evolution is important for many fault mechanics and reservoir engineering problems. Recent laboratory measurements demonstrate that in the cataclastic flow regime, the stress-induced anisotropic reduction of permeability in porous rocks can be separated into 3 different stages. In the elastic regime (stage I), permeability and porosity reduction are solely controlled by the effective mean stress, with negligible permeability anisotropy. Stage II starts at the onset of shear-enhanced compaction, when a critical yield stress is attained. In stage II, the deviatoric stress exerts primary control over permeability and porosity evolution. The increase in deviatoric stress results in drastic permeability and porosity reduction and considerable permeability anisotropy. The transition from stage II to stage III takes place progressively during the development of pervasive cataclastic flow. In stage III, permeability and porosity reduction becomes gradual again, and permeability anisotropy diminishes. Microstructural observations on deformed samples using laser confocal microscopy reveal that stress-induced microcracking and pore collapse are the primary forms of damage during cataclastic flow. A probabilistic damage model is formulated to characterize the effects of stress on permeability and its anisotropy. In our model, the effects of both effective mean stress and differential stress on permeability evolution are calculated. By introducing stress sensitivity coefficients, we propose a first-order description of the dependence of permeability evolution on different loading paths. Built upon the micromechanisms of deformation in porous rocks, this unified model provides new insight into the coupling of stress and permeability.
Controls on melt migration and extraction at the ultraslow Southwest Indian Ridge 10°–16°E

(American Geophysical Union, 2011-10-04) Montesi, Laurent G. J. ; Behn, Mark D. ; Hebert, Laura B. ; Lin, Jian ; Barry, Jennifer L.

Crustal thickness variations at the ultraslow spreading 10–16°E region of the Southwest Indian Ridge are used to constrain melt migration processes. In the study area, ridge morphology correlates with the obliquity of the ridge axis with respect to the spreading direction. A long oblique “supersegment”, nearly devoid of magmatism, is flanked at either end by robust magmatic centers (Joseph Mayes Seamount and Narrowgate segment) of much lesser obliquity. Plate-driven mantle flow and temperature structure are calculated in 3-D based on the observed ridge segmentation. Melt extraction is assumed to occur in three steps: (1) vertical migration out of the melting region, (2) focusing along an inclined permeability barrier, and (3) extraction when the melt enters a region shallower than ∼35 km within 5 km of the ridge axis. No crust is predicted in our model along the oblique supersegment. The formation of Joseph Mayes Seamount is consistent with an on-axis melt anomaly induced by the local orthogonal spreading. The crustal thickness anomaly at Narrowgate results from melt extracted at a tectonic damage zone as it travels along the axis toward regions of lesser obliquity. Orthogonal spreading enhances the Narrowgate crustal thickness anomaly but is not necessary for it. The lack of a residual mantle Bouguer gravity high along the oblique supersegment can be explained by deep serpentization of the upper mantle permissible by the thermal structure of this ridge segment. Buoyancy-driven upwelling and/or mantle heterogeneities are not required to explain the extreme focusing of melt in the study area.
Experimental evidence for melt partitioning between olivine and orthopyroxene in partially molten harzburgite

(John Wiley & Sons, 2016-08-31) Miller, Kevin J. ; Zhu, Wenlu ; Montesi, Laurent G. J. ; Gaetani, Glenn A. ; Le Roux, Véronique ; Xiao, Xianghui

Observations of dunite channels in ophiolites and uranium series disequilibria in mid-ocean ridge basalt suggest that melt transport in the upper mantle beneath mid-ocean ridges is strongly channelized. We present experimental evidence that spatial variations in mineralogy can also focus melt on the grain scale. This lithologic melt partitioning, which results from differences in the interfacial energies associated with olivine-melt and orthopyroxene-melt boundaries, may complement other melt focusing mechanisms in the upper mantle such as mechanical shear and pyroxene dissolution. We document here lithologic melt partitioning in olivine-/orthopyroxene-basaltic melt samples containing nominal olivine to orthopyroxene ratio of 3 to 2 and melt fractions of 0.02 to 0.20. Experimental samples were imaged using synchrotron-based X-ray microcomputed tomography at a resolution of 700 nm per voxel. By analyzing the local melt fraction distributions associated with olivine and orthopyroxene grains in each sample, we found that the melt partitioning coefficient, i.e., the ratio of melt fraction around olivine to that around orthopyroxene grains, varies between 1.1 and 1.6. The permeability and electrical conductivity of our digital samples were estimated using numerical models and compared to those of samples containing only olivine and basaltic melt. Our results suggest that lithologic melt partitioning and preferential localization of melt around olivine grains might play a role in melt focusing, potentially enhancing average melt ascent velocities.
MeltMigrator : a MATLAB-based software for modeling three-dimensional melt migration and crustal thickness variations at mid-ocean ridges following a rules-based approach

(John Wiley & Sons, 2017-01-22) Bai, Hailong ; Montesi, Laurent G. J. ; Behn, Mark D.

MeltMigrator is a MATLAB®-based melt migration software developed to process three-dimensional mantle temperature and velocity data from user-supplied numerical models of mid-ocean ridges, calculate melt production and melt migration trajectories in the mantle, estimate melt flux along plate boundaries, and predict crustal thickness distribution on the seafloor. MeltMigrator is also capable of calculating compositional evolution depending on the choice of petrologic melting model. Programmed in modules, MeltMigrator is highly customizable and can be expanded to a wide range of applications. We have applied it to complex mid-ocean ridge model settings, including transform faults, oblique segments, ridge migration, asymmetrical spreading, background mantle flow, and ridge-plume interaction. In this technical report, we include an example application to a segmented mid-ocean ridge. MeltMigrator is available as a supplement to this paper, and it is also available from GitHub and the University of Maryland Geodynamics Group website.
Controls of shear zone rheology and tectonic loading on postseismic creep

(American Geophysical Union, 2004-10-08) Montesi, Laurent G. J.

Postseismic deformation is well documented in geodetic data collected in the aftermath of large earthquakes. In the postseismic time interval, GPS is most sensitive to creep in the lower crust or upper mantle activated by earthquake-generated stress perturbations. In these regions, deformation may be localized on an aseismic frictional surface or on a ductile shear zone. These two hypotheses imply specific rheologies and therefore time dependence of postseismic creep. Hence postseismic creep constitutes a potential probe into the rheology of aseismic regions of the lithosphere. I present a simple shear zone model of postseismic creep in which the rheology of the creeping element can be varied. In the absence of tectonic loading during the postseismic time interval, the displacement history of the shear zone obeying a power law rheology with stress exponent n follows an analytical relaxation curve parameterized by 1/n. For a frictional surface, postseismic creep follows the same relaxation law in the limit 1/n → 0. A rough estimate of the apparent stress exponent can be obtained from continuous GPS records. Application to data collected after the 1994 Sanriku earthquake yields 1/n ∼ 0.1, which is consistent with dislocation creep mechanisms. However, the records of two other subduction zone events, the 2001 Peru event and the 1997 Kronotski earthquake, and a continental strike-slip earthquake, the 1999 İzmit earthquake, require negative 1/n. Rather than characterizing the shear zone rheology, these negative exponents indicate that reloading of the shear zone by tectonic forces is important. Numerical simulations of postseismic deformation with nonnegligible reloading produce curves that are well fit by the generalized relaxation law with 1/n < 0, although the actual stress exponent of the rheology is positive. While this prevents rheology from being tightly constrained by the studied GPS records, it indicates that reloading is important in the postseismic time interval. In other words, the stress perturbation induced by an earthquake is comparable to the stress supported by ductile shear zones in the interseismic period.

Montesi Laurent G. J.

Last Name

First Name

ORCID

Filters

Author

Subject

Date

Type

Has files

Settings

Sort By

Results per page

Search Results