Blake Donald R.

No Thumbnail Available
Last Name
Blake
First Name
Donald R.
ORCID

Filters

2011 1
1
1
Reset filters

Settings

Search Results

Now showing 1 - 1 of 1
  • Preprint
    Chemical data quantify Deepwater Horizon hydrocarbon flow rate and environmental distribution
    ( 2011-11-11) Ryerson, Thomas B. ; Camilli, Richard ; Kessler, John D. ; Kujawinski, Elizabeth B. ; Reddy, Christopher M. ; Valentine, David L. ; Atlas, Elliot ; Blake, Donald R. ; de Gouw, Joost ; Meinardi, Simone ; Parrish, David D. ; Peischl, Jeff ; Seewald, Jeffrey S. ; Warneke, Carsten
    Detailed airborne, surface, and subsurface chemical measurements, primarily obtained in May and June 2010, are used to quantify initial hydrocarbon compositions along different transport pathways – in deep subsurface plumes, in the initial surface slick, and in the atmosphere – during the Deepwater Horizon (DWH) oil spill. Atmospheric measurements are consistent with a limited area of surfacing oil, with implications for leaked hydrocarbon mass transport and oil drop size distributions. The chemical data further suggest relatively little variation in leaking hydrocarbon composition over time. While readily soluble hydrocarbons made up ~25% of the leaking mixture by mass, subsurface chemical data show these compounds made up ~69% of the deep plume mass; only ~31% of deep plume mass was initially transported in the form of trapped oil droplets. Mass flows along individual transport pathways are also derived from atmospheric and subsurface chemical data. Subsurface hydrocarbon composition, dissolved oxygen, and dispersant data are used to provide a new assessment of release of hydrocarbons from the leaking well. We use the chemical measurements to estimate that (7.8±1.9) x106 kg of hydrocarbons leaked on June 10, 2010, directly accounting for roughly three-quarters of the total leaked mass on that day. The average environmental release rate of (10.1 ± 2.0) x106 kg/day derived using atmospheric and subsurface chemical data agrees within uncertainties with the official average leak rate of (10.2 ± 1.0) x106 kg/day derived using physical and optical methods.