Olive
Jean-Arthur
Olive
Jean-Arthur
No Thumbnail Available
Search Results
Now showing
1 - 6 of 6
-
ArticleThe role of elasticity in simulating long-term tectonic extension(Oxford University Press, 2016-01-27) Olive, Jean-Arthur ; Behn, Mark D. ; Mittelstaedt, Eric ; Ito, Garrett T. ; Klein, Benjamin Z.While elasticity is a defining characteristic of the Earth's lithosphere, it is often ignored in numerical models of long-term tectonic processes in favour of a simpler viscoplastic description. Here we assess the consequences of this assumption on a well-studied geodynamic problem: the growth of normal faults at an extensional plate boundary. We conduct 2-D numerical simulations of extension in elastoplastic and viscoplastic layers using a finite difference, particle-in-cell numerical approach. Our models simulate a range of faulted layer thicknesses and extension rates, allowing us to quantify the role of elasticity on three key observables: fault-induced topography, fault rotation, and fault life span. In agreement with earlier studies, simulations carried out in elastoplastic layers produce rate-independent lithospheric flexure accompanied by rapid fault rotation and an inverse relationship between fault life span and faulted layer thickness. By contrast, models carried out with a viscoplastic lithosphere produce results that may qualitatively resemble the elastoplastic case, but depend strongly on the product of extension rate and layer viscosity U × ηL. When this product is high, fault growth initially generates little deformation of the footwall and hanging wall blocks, resulting in unrealistic, rigid block-offset in topography across the fault. This configuration progressively transitions into a regime where topographic decay associated with flexure is fully accommodated within the numerical domain. In addition, high U × ηL favours the sequential growth of multiple short-offset faults as opposed to a large-offset detachment. We interpret these results by comparing them to an analytical model for the fault-induced flexure of a thin viscous plate. The key to understanding the viscoplastic model results lies in the rate-dependence of the flexural wavelength of a viscous plate, and the strain rate dependence of the force increase associated with footwall and hanging wall bending. This behaviour produces unrealistic deformation patterns that can hinder the geological relevance of long-term rifting models that assume a viscoplastic rheology.
-
ArticleDepth‐dependent permeability and heat output at basalt‐hosted hydrothermal systems across mid‐ocean ridge spreading rates(John Wiley & Sons, 2018-04-20) Barreyre, Thibaut ; Olive, Jean-Arthur ; Crone, Timothy J. ; Sohn, Robert A.The permeability of the oceanic crust exerts a primary influence on the vigor of hydrothermal circulation at mid‐ocean ridges, but it is a difficult to measure parameter that varies with time, space, and geological setting. Here we develop an analytical model for the poroelastic response of hydrothermal exit‐fluid velocities and temperatures to ocean tidal loading in a two‐layered medium to constrain the discharge zone permeability of each layer. The top layer, corresponding to extrusive lithologies (e.g., seismic layer 2A) overlies a lower permeability layer, corresponding to intrusive lithologies (e.g., layer 2B). We apply the model to three basalt‐hosted hydrothermal fields (i.e., Lucky Strike, Main Endeavour and 9°46′N L‐vent) for which the seismic stratigraphy is well‐established, and for which robust exit‐fluid temperature data are available. We find that the poroelastic response to tidal loading is primarily controlled by layer 2A permeability, which is about 3 orders of magnitude higher for the Lucky Strike site (∼10−10 m2) than the 9°46′N L‐vent site (∼10−13 m2). By contrast, layer 2B permeability does not exert a strong control on the poroelastic response to tidal loading, yet strongly modulates the heat output of hydrothermal discharge zones. Taking these constraints into account, we estimate a plausible range of layer 2B permeability between ∼10−15 m2 and an upper‐bound value of ∼10−14 (9°46′N L‐vent) to ∼10−12 m2 (Lucky Strike). These permeability structures reconcile the short‐term response and long‐term thermal output of hydrothermal sites, and provide new insights into the links between permeability and tectono‐magmatic processes along the global mid‐ocean ridge.
-
ArticleControls on mid‐ocean ridge normal fault seismicity across spreading rates from rate‐and‐state friction models(John Wiley & Sons, 2018-08-16) Mark, Hannah F. ; Behn, Mark D. ; Olive, Jean-Arthur ; Liu, YajingRecent seismic and geodetic observations have led to a growing realization that a significant amount of fault slip at plate boundaries occurs aseismically and that the amount of aseismic slip varies across tectonic settings. Seismic moment release rates measured along the fast‐spreading East Pacific Rise suggest that the majority of fault slip occurs aseismically. By contrast, at the slow‐spreading Mid‐Atlantic Ridge seismic slip may represent up to 60% of total fault displacement. In this study, we use rate‐and‐state friction models to quantify the seismic coupling coefficient, defined as the fraction of total fault slip that occurs seismically, on mid‐ocean ridge normal faults and investigate controls on fault behavior that might produce variations in coupling observed at oceanic spreading centers. We find that the seismic coupling coefficient scales with the ratio of the downdip width of the seismogenic area (W) to the critical earthquake nucleation size (h*). At mid‐ocean ridges, W is expected to increase with decreasing spreading rate. Thus, the relationship between seismic coupling and W/h* predicted from our models explains the first‐order variations in seismic coupling coefficient as a function of spreading rate.
-
ArticleCauses of oceanic crustal thickness oscillations along a 74-M Mid-Atlantic ridge flow line(American Geophysical Union, 2019-11-19) Shinevar, William J. ; Mark, Hannah F. ; Clerc, Fiona ; Codillo, Emmanuel A. ; Gong, Jianhua ; Olive, Jean-Arthur ; Brown, Stephanie M. ; Smalls, Paris T. ; Liao, Yang ; Le Roux, Véronique ; Behn, Mark D.Gravity, magnetic, and bathymetry data collected along a continuous 1,400‐km‐long spreading‐parallel flow line across the Mid‐Atlantic Ridge indicate significant tectonic and magmatic fluctuations in the formation of oceanic crust over a range of time scales. The transect spans from 28 Ma on the African Plate to 74 Ma on the North American plate, crossing the Mid‐Atlantic Ridge at 35.8°N. Gravity‐derived crustal thicknesses vary from 3–9 km with a standard deviation of 1.0 km. Spectral analysis of bathymetry and residual mantle Bouguer anomaly show a diffuse power at >1 Myr and concurrent peaks at 390, 550, and 950 kyr. Large‐scale (>10 km) mantle thermal and compositional heterogeneities, variations in upper mantle flow, and detachment faulting likely generate the >1 Myr diffuse power. The 550‐ and 950‐kyr peaks may reflect the presence of magma solitons and/or regularly spaced ~7.7 and 13.3 km short‐wavelength mantle compositional heterogeneities. The 390‐kyr spectral peak corresponds to the characteristic spacing of faults along the flow line. Fault spacing also varies over longer periods (>10 Myr), which we interpret as reflecting long‐lived changes in the fraction of tectonically versus magmatically accommodated extensional strain. A newly discovered off‐axis oceanic core complex (Kafka Dome) found at 8 Ma on the African plate further suggests extended time periods of tectonically‐dominated plate separation. Fault spacing negatively correlates with gravity‐derived crustal thickness, supporting a strong link between magma input and fault style at mid‐ocean ridges.
-
ArticleMagmatic and tectonic extension at the Chile Ridge : evidence for mantle controls on ridge segmentation(John Wiley & Sons, 2016-06-24) Howell, Samuel M. ; Ito, Garrett T. ; Behn, Mark D. ; Martinez, Fernando ; Olive, Jean-Arthur ; Escartin, Javier E.We use data from an extensive multibeam bathymetry survey of the Chile Ridge to study tectonomagmatic processes at the ridge axis. Specifically, we investigate how abyssal hills evolve from axial faults, how variations in magmatic extension influence morphology and faulting along the spreading axis, and how these variations correlate with ridge segmentation. The bathymetry data are used to estimate the fraction of plate separation accommodated by normal faulting, and the remaining fraction of extension, M, is attributed primarily to magmatic accretion. Results show that M ranges from 0.85 to 0.96, systematically increasing from first-order and second-order ridge segment offsets toward segment centers as the depth of ridge axis shoals relative to the flanking highs of the axial valley. Fault spacing, however, does not correlate with ridge geometry, morphology, or M along the Chile Ridge, which suggests the observed increase in tectonic strain toward segment ends is achieved through increased slip on approximately equally spaced faults. Variations in M along the segments follow variations in petrologic indicators of mantle melt fraction, both showing a preferred length scale of 50 ± 20 km that persists even along much longer ridge segments. In comparison, mean M and axial relief fail to show significant correlations with distance offsetting the segments. These two findings suggest a form of magmatic segmentation that is partially decoupled from the geometry of the plate boundary. We hypothesize this magmatic segmentation arises from cells of buoyantly upwelling mantle that influence tectonic segmentation from the mantle, up.
-
DatasetCauses of oceanic crustal thickness oscillations along a 74-Myr Mid-Atlantic Ridge flow line( 2019-11-12) Shinevar, William J. ; Mark, Hannah F. ; Clerc, Fiona ; Codillo, Emmanuel A. ; Gong, Jianhua ; Olive, Jean-Arthur ; Brown, Stephanie M. ; Smalls, Paris T. ; Liao, Yang ; Le Roux, Véronique ; Behn, Mark D.Gravity, magnetic, and bathymetry data collected along a continuous 1400-km-long spreading-parallel flow line across the Mid-Atlantic Ridge indicate significant tectonic and magmatic fluctuations in the formation of oceanic crust over a range of timescales. The transect spans from 28 Ma on the African Plate to 74 Ma on the North American plate, crossing the Mid-Atlantic Ridge at 35.8 ºN. Gravity-derived crustal thicknesses vary from 3–9 km with a standard deviation of 1 km. Spectral analysis of bathymetry and residual mantle Bouguer anomaly (RMBA) show diffuse power at >1 Myr and concurrent peaks at 390, 550, and 950 kyr. Large-scale (>10-km) mantle thermal and compositional heterogeneities, variations in upper mantle flow, and detachment faulting likely generate the >1 Myr diffuse power. The 550- and 950-kyr peaks may reflect the presence of magma solitons and/or regularly spaced ~7.7 and 13.3 km short-wavelength mantle compositional heterogeneities. The 390-kyr spectral peak corresponds to the characteristic spacing of faults along the flow line. Fault spacing also varies over longer periods (>10 Myr), which we interpret as reflecting long-lived changes in the fraction of tectonically- vs. magmatically- accommodated extensional strain. A newly discovered off-axis oceanic core complex (Kafka Dome) found at 8 Ma on the African plate further suggests extended time periods of tectonically dominated plate separation. Fault spacing negatively correlates with gravity-derived crustal thickness, supporting a strong link between magma input and fault style at mid-ocean ridges.