Smith Jason C.

No Thumbnail Available
Last Name
Smith
First Name
Jason C.
ORCID

Search Results

Now showing 1 - 14 of 14
  • Technical Report
    WHOI Hawaii Ocean Timeseries Station (WHOTS) : WHOTS-4 2007 mooring turnaround cruise report
    (Woods Hole Oceanographic Institution, 2008-01) Whelan, Sean P. ; Plueddemann, Albert J. ; Lukas, Roger ; Lord, Jeffrey ; Lethaby, Paul ; Snyder, Jefrey ; Smith, Jason C. ; Bahr, Frank B. ; Galbraith, Nancy R. ; Sabine, Christopher L.
    The Woods Hole Oceanographic Institution (WHOI) Hawaii Ocean Timeseries (HOT) Site (WHOTS), 100 km north of Oahu, Hawaii, is intended to provide long-term, high-quality air-sea fluxes as a part of the NOAA Climate Observation Program. The WHOTS mooring also serves as a coordinated part of the HOT program, contributing to the goals of observing heat, fresh water and chemical fluxes at a site representative of the oligotrophic North Pacific Ocean. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 22.75°N, 158°W by successive mooring turnarounds. These observations will be used to investigate air–sea interaction processes related to climate variability. The first three WHOTS moorings (WHOTS-1 through 3) were deployed in August 2004, July 2005 and June 2006, respectively. This report documents recovery of the WHOTS-3 mooring and deployment of the fourth mooring (WHOTS-4). Both moorings used Surlyn foam buoys as the surface element and were outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each ASIMET system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 155 m of the moorings were outfitted with oceanographic sensors for the measurement of temperature, conductivity and velocity in a cooperative effort with R. Lukas of the University of Hawaii. A pCO2 system was installed on the WHOT-3 buoy in a cooperative effort with Chris Sabine at the Pacific Marine Environmental Laboratory. The WHOTS mooring turnaround was done on the University of Hawaii research vessel Kilo Moana, Cruise KM-07-08, by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution. The cruise took place between 24 June and 1 July 2007. Operations began with deployment of the WHOTS-4 mooring on 25 June at approximately 22°40.2′N, 157°57.0′W in 4756 m of water. This was followed by meteorological intercomparisons and CTDs at the WHOTS-4 and WHOTS-3 sites. The WHOTS-3 mooring was recovered on June 28th followed by CTD operations at the HOT site and shipboard meteorological observations at several sites to the south of the mooring site. This report describes these cruise operations, as well as some of the in-port operations and pre-cruise buoy preparations.
  • Technical Report
    Stratus Ocean Reference Station (20˚S, 85˚W), mooring recovery and deployment cruise R/V Revelle cruise dana 03, November 10 - November 26, 2003
    (Woods Hole Oceanographic Institution, 2004-03) Hutto, Lara ; Weller, Robert A. ; Lord, Jeffrey ; Smith, Jason C. ; Ryder, James R. ; Galbraith, Nancy R. ; Fairall, Christopher W. ; Stalin, Scott ; Andueza, Juan Carlos ; Tomlinson, Jason
    The Ocean Reference Station at 20°S, 85°W under the stratus clouds west of northern Chile and Peru is being maintained to provide ongoing, climate-quality records of surface meteorology, of air-sea fluxes of heat, freshwater, and momentum, and of upper ocean temperature, salinity, and velocity variability. The Stratus Ocean Reference Station, hereafter ORS Stratus, is supported by the National Oceanic and Atmospheric Administrations (NOAA) Climate Observation Program. It is recovered and redeployed annually, with cruises that have come in October or November. During the November 2003 cruise of Scripps Institution of Oceanography's R/V Roger Revelle to the ORS Stratus site, the primary activities where the recovery of the WHOI surface mooring that had been deployed in October 2002, the deployment of a new WHOI surface mooring at that site, the in-situ calibration of the buoy meteorological sensors by comparison with instrumentation put on board by Chris Fairall of the NOAA Environmental Technology Laboratory (ETL), and observations of the stratus clouds and lower atmosphere by NOAA ETL and Jason Tomlinson from Texas A&M. The ORS Stratus buoys are equipped with two Improved Meteorological systems, which provide surface wind speed and direction, air temperature, relative humidity, barometric pressure, incoming shortwave radiation, incoming longwave radiation, precipitation rate, and sea surface temperature. The IMET data are made available in near real time using satellite telemetry. The mooring line carries instruments to measure ocean salinity, temperature, and currents. On some deployments, additional instrumentation is attached to the mooring to measure rainfall and bio-optical variability. The ETL instrumentation used during the 2003 cruise included a cloud radar, radiosonde balloons, and sensors for mean and turbulent surface meteorology. In addition to this work, buoy work was done in support of the Ecuadorian Navy Institute of Oceanography (INOCAR) and of the Chilean Navy Hydrographic and Oceanographic Service (SHOA). The surface buoy, oceanographic instrumentation, and upper 500 m of an INOCAR surface mooring at 2°S, 84°W that had been vandalized were recovered and transferred to the Ecuadorian Navy vessel B. A. E. Calicuchima. A tsunami warning mooring was installed at 75°W, 20°S for SHOA. SHOA personnel onboard were trained during the cruise by staff from the NOAA Pacific Marine Environmental Laboratory (PMEL) and National Data Buoy Center (NDBC). The cruise hosted two teachers participating in NOAA's Teacher at Sea Program, Deb Brice from San Marcos, California and Viviana Zamorano from Arica, Chile.
  • Technical Report
    Stratus Ocean Reference Station (20˚S, 85˚W), mooring recovery and deployment cruise, R/V Ron Brown cruise 04-11, December 5 - December 24, 2004
    (Woods Hole Oceanographic Institution, 2005-05) Colbo, Keir ; Weller, Robert A. ; Lord, Jeffrey ; Smith, Jason C. ; Bouchard, Paul R. ; Fairall, Christopher W. ; Bradley, Frank ; Wolfe, Dan ; Serpetzoglou, Efthymios ; Tomlinson, Jason ; Tisandie, Alvaro Gustave Vera ; Bustos, Juan Francisco Santibanez
    The Ocean Reference Station at 20° S, 85° W under the stratus clouds west of northern Chile and Peru is being maintained to provide ongoing, climate-quality records of surface meteorology, of air-sea fluxes of heat, freshwater, and momentum, and of upper ocean temperature, salinity, and velocity variability. The Stratus Ocean Reference Station (ORS Stratus) is supported by the National Oceanic and Atmospheric Administration’s (NOAA) Climate Observation Program. It is recovered and redeployed annually, with cruises that have come between October and December. During the December 2004 cruise of NOAA's R/V Ronald H. Brown to the ORS Stratus site, the primary activities where the recovery of the WHOI surface mooring that had been deployed in November 2003, the deployment of a new WHOI surface mooring at that site, the in-situ calibration of the buoy meteorological sensors by comparison with instrumentation put on board by staff of the NOAA Environmental Technology Laboratory (ETL), and observations of the stratus clouds and lower atmosphere by NOAA ETL and Jason Tomlinson from Texas A&M. The ORS Stratus buoys are equipped with two Improved Meteorological systems, which provide surface wind speed and direction, air temperature, relative humidity, barometric pressure, incoming shortwave radiation, incoming longwave radiation, precipitation rate, and sea surface temperature. The IMET data are made available in near real time using satellite telemetry. The mooring line carries instruments to measure ocean salinity, temperature, and currents. The ETL instrumentation used during the 2004 cruise included cloud radar, radiosonde balloons, and sensors for mean and turbulent surface meteorology. The atmospheric observations also benefited from the C-Band radar mounted on the R/V Ronald H. Brown. In addition to this work, buoy work was done in support of the Chilean Navy Hydrographic and Oceanographic Service (SHOA). A tsunami warning mooring was reinstalled at 75°W, 20°S for SHOA, after the previous buoy installed last year failed. SHOA personnel were onboard to direct the deployment and to gain experience. Four students from the University of Concepcion collected hydrographic data and water samples. One other Chilean student from the University of Chile was involved in the atmospheric sampling program, with a particular focus on the near coast jet. Finally, the cruise hosted a teacher participating in NOAA's Teacher at Sea Program, Mary Esther Cook, who used her experience to develop lessons for her class back in Arkansas.
  • Technical Report
    WHOI Hawaii Ocean Timeseries Station (WHOTS) : WHOTS-5 2008 mooring turnaround cruise report
    (Woods Hole Oceanographic Institution, 2009-04) Whelan, Sean P. ; Lord, Jeffrey ; Weller, Robert A. ; Lukas, Roger ; Santiago-Mandujano, Fernando ; Snyder, Jefrey ; Lethaby, Paul ; Bahr, Frank B. ; Sabine, Christopher L. ; Smith, Jason C. ; Bouchard, Paul R. ; Galbraith, Nancy R.
    The Woods Hole Oceanographic Institution (WHOI) Hawaii Ocean Timeseries (HOT) Site (WHOTS), 100 km north of Oahu, Hawaii, is intended to provide long-term, high-quality air-sea fluxes as a part of the NOAA Climate Observation Program. The WHOTS mooring also serves as a coordinated part of the HOT program, contributing to the goals of observing heat, fresh water and chemical fluxes at a site representative of the oligotrophic North Pacific Ocean. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 22.75°N, 158°W by successive mooring turnarounds. These observations will be used to investigate air–sea interaction processes related to climate variability. The first four WHOTS moorings (WHOTS-1 through 4) were deployed in August 2004, July 2005, June 2006, and June 2007, respectively. This report documents recovery of the WHOTS-4 mooring and deployment of the fifth mooring (WHOTS-5). Both moorings used Surlyn foam buoys as the surface element and were outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each ASIMET system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 155 m of the moorings were outfitted with oceanographic sensors for the measurement of temperature, conductivity and velocity in a cooperative effort with R. Lukas of the University of Hawaii. A pCO2 system was installed on the WHOTS-5 buoy in a cooperative effort with Chris Sabine at the Pacific Marine Environmental Laboratory. The WHOTS mooring turnaround was done on the University of Hawaii research vessel Kilo Moana, Cruise KM-08-08, by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution. The cruise took place between 3 and 11 June 2008. Operations began with deployment of the WHOTS-5 mooring on 5 June at approximately 22°46.1'N, 157°54.1'W in 4702 m of water. This was followed by meteorological intercomparisons and CTDs at the WHOTS-4 site. A period of calmer weather was taken advantage of to recover WHOTS-4 on 6 June 2008. The Kilo Moana then returned to the WHOTS-5 mooring for CTD operations and meteorological intercomparisons. This report describes these cruise operations, as well as some of the in-port operations and pre-cruise buoy preparations.
  • Technical Report
    The Northwest Tropical Atlantic Station (NTAS) : NTAS-15 Mooring Turnaround Cruise Report cruise on board RV Endeavor January 25 - February 13, 2016 Narragansett RI, USA - San Juan, Puerto Rico
    (Woods Hole Oceanographic Institution, 2016-11) Bigorre, Sebastien P. ; Ryder, James R. ; Smith, Jason C. ; Lankhorst, Matthias ; Plueddemann, Albert
    The Northwest Tropical Atlantic Station (NTAS) was established to address the need for accurate air-sea flux estimates and upper ocean measurements in a region with strong sea surface temperature anomalies and the likelihood of significant local air–sea interaction on interannual to decadal timescales. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 15°N, 51°W by successive mooring turnarounds. These observations are used to investigate air–sea interaction processes related to climate variability. The NTAS Ocean Reference Station (ORS NTAS) is supported by the National Oceanic and Atmospheric Administration’s (NOAA) Climate Observation Program. This report documents recovery of the NTAS-14 mooring and deployment of the NTAS-15 mooring at the same site. Both moorings used Surlyn foam buoys as the surface element. These buoys were outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 160 m of the mooring line were outfitted with oceanographic sensors for the measurement of temperature, salinity and velocity. The mooring turnaround was done by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution (WHOI), onboard R/V Endeavor, Cruise EN573. The cruise took place between January 25 and February 13 2016. The NTAS-15 mooring was deployed on February 2, and the NTAS-14 mooring was recovered on February 4. A 24-hour intercomparison period was conducted on February 5, during which data from the buoy, telemetered through Argos satellite system, and the ship’s meteorological and oceanographic data were monitored while the ship was stationed 0.2 nm downwind of NTAS-15 buoy. A similar procedure was done at NTAS-14 but for only about 10 hours on the morning of February 4. This report describes these operations, as well as other work done on the cruise and some of the precruise buoy preparations. Other operations during EN573 consisted in the recovery and deployment of the Meridional Overturning Variability Experiment (MOVE) subsurface moorings array (MOVE 1 in the east, and MOVE 3 and 4 in the west near Guadeloupe). Acoustic download of data from Pressure Inverted Echo Sounders (PIES) was also conducted. MOVE is designed to monitor the integrated deep meridional flow in the tropical North Atlantic.
  • Technical Report
    A compact coastal ocean observing system for Kernel Blitz 2001
    (Woods Hole Oceanographic Institution, 2001-12) Gobat, Jason I. ; Weller, Robert A. ; Way, Bryan S. ; Lord, Jeffrey ; Pritchard, Mark ; Smith, Jason C.
    In this report we describe a compact, easily deployed, moored system for oceanographic and meteorological observations in the coastal ocean. The system consists of a surface and subsurface mooring pair deployed adjacent to one another. Compared to a single catenary surface mooring, this arrangement allows the entire water column to be instrumented. All of the instruments in the system log high resolution time series data. Additionally, the mooring line instruments periodically report averaged data to the buoys via inductive modems. On the subsurface mooring, this averaged data is sent to the surface buoy using an acoustic modem. Inductively coupled mooring line instrumentation includes conductivity, temperature, and pressure sensors, acoustic current meters, and optical backscattering and absorption sensors. In addition to mooring line instruments, the surface buoy collects averaged data from meteorological sensors, including wind speed and direction, barometric pressure, relative humidity, air temperature, precipitation, longwave and shortwave radiation, sea surface temperature and conductivity, and wave height and period. Data from both mooring lines and from the surface meteorological sensors is telemetered to shore via line-of-sight radio and satellite. The entire system, including buoys, moorings, instruments, launch and recovery gear, telemetry receive, and data processing facilities can be packed into a single 20 foot shipping container. The system was successfully deployed to provide environmental monitoring for Kernel Blitz 2001, a US Navy fleet exercise off southern California. Results from the deployment are presented.
  • Article
    Evaluation and recommendations for improving the accuracy of an inexpensive water temperature logger
    (American Meteorological Society, 2013-07) Lentz, Steven J. ; Churchill, James H. ; Marquette, Craig D. ; Smith, Jason C.
    Onset's HOBO U22 Water Temp Pros are small, reliable, relatively inexpensive, self-contained temperature loggers that are widely used in studies of oceans, lakes, and streams. An in-house temperature bath calibration of 158 Temp Pros indicated root-mean-square (RMS) errors ranging from 0.01° to 0.14°C, with one value of 0.23°C, consistent with the factory specifications. Application of a quadratic calibration correction substantially reduced the RMS error to less than 0.009°C in all cases. The primary correction was a bias error typically between −0.1° and 0.15°C. Comparison of water temperature measurements from Temp Pros and more accurate temperature loggers during two oceanographic studies indicates that calibrated Temp Pros have an RMS error of ~0.02°C throughout the water column at night and beneath the surface layer influenced by penetrating solar radiation during the day. Larger RMS errors (up to 0.08°C) are observed near the surface during the day due to solar heating of the black Temp Pro housing. Errors due to solar heating are significantly reduced by wrapping the housing with white electrical tape.
  • Technical Report
    WHOI Hawaii Ocean Timeseries Station (WHOTS) : WHOTS-7 2010 mooring turnaround cruise report
    (Woods Hole Oceanographic Institution, 2011-03) Whelan, Sean P. ; Nosse, Craig ; Lethaby, Paul ; Snyder, Jefrey ; Lukas, Roger ; Weller, Robert A. ; Ostrom, William M. ; Smith, Jason C.
    The Woods Hole Oceanographic Institution (WHOI) Hawaii Ocean Timeseries (HOT) Site (WHOTS), 100 km north of Oahu, Hawaii, is intended to provide long-term, high-quality air-sea fluxes as a part of the NOAA Climate Observation Program. The WHOTS mooring also serves as a coordinated part of the HOT program, contributing to the goals of observing heat, fresh water and chemical fluxes at a site representative of the oligotrophic North Pacific Ocean. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 22.75°N, 158°W by successive mooring turnarounds. These observations will be used to investigate air–sea interaction processes related to climate variability. This report documents recovery of the WHOTS-6 mooring and deployment of the seventh mooring (WHOTS-7). Both moorings used Surlyn foam buoys as the surface element and were outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each ASIMET system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 155 m of the moorings were outfitted with oceanographic sensors for the measurement of temperature, conductivity and velocity in a cooperative effort with R. Lukas of the University of Hawaii. A pCO2 system was installed on the WHOTS-7 buoy in a cooperative effort with Chris Sabine at the Pacific Marine Environmental Laboratory. The WHOTS mooring turnaround was done on the University of Hawaii research vessel Kilo Moana, by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution. The cruise took place between 27 July and 4 August 2010. Operations began with deployment of the WHOTS-7 mooring on 28 July. This was followed by meteorological intercomparisons and CTDs. Recovery of WHOTS-6 took place on 2 Aug 2010. This report describes these cruise operations, as well as some of the in-port operations and pre-cruise buoy preparations.
  • Technical Report
    WHOI Hawaii Ocean Timeseries Station (WHOTS) : WHOTS-3 mooring turnaround cruise report
    (Woods Hole Oceanographic Institution, 2007-05) Whelan, Sean P. ; Weller, Robert A. ; Lukas, Roger ; Bradley, Frank ; Lord, Jeffrey ; Smith, Jason C. ; Bahr, Frank B. ; Lethaby, Paul ; Snyder, Jefrey
    The Woods Hole Oceanographic Institution (WHOI) Hawaii Ocean Timeseries (HOT) Site (WHOTS), 100 km north of Oahu, Hawaii, is intended to provide long-term, high-quality air-sea fluxes as a coordinated part of the HOT program and contribute to the goals of observing heat, fresh water, and chemical fluxes at a site representative of the oligotrophic North Pacific Ocean. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 22.75N 158W by successive mooring turnarounds. These observations will be used to investigate air-sea interaction processes related to climate variability. The first WHOTS mooring (WHOTS-1) was deployed in August 2004. WHOTS-1 was recovered and WHOTS-2 deployed in July 2005. This report documents recovery of the WHOTS-2 mooring and deployment of the third mooring (WHOTS-3) at the same site. Both moorings used Surlyn foam buoys as the surface element and were outfitted with two Air-Sea Interaction Meteorology (ASIMET) systems. Each system measures, records, and transmits via Argos satellite, the surface meteorological variables necessary to compute air-sea fluxes of heat, moisture, and momentum. WHOTS-2 was equipped with one Iridium data transmitter, and WHOTS-3 had two Iridium data transmitters. In cooperation with R. Lukas of the University of Hawaii, the upper 155 m of the morrings were outfitted with oceanographic sensors for the measurement of temperature, conductivity, and velocity. The WHOTS mooring turnaround was done on the Scripps Institution of Oceanography ship Revelle, Cruise AMAT-07, by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution and Roger Lukas’group at the University of Hawaii. The cruise took place between 22 and 29 June 2006. Operations on site were initiated with an intercomparison of shipboard meteorological observations with the WHOTS-2 buoy. Dr. Frank Bradley, CSIRO, Australia, assisted with these comparisons. This was followed by recovery of the WHOTS-2 mooring on 24 June. A number of recovered instruments were calibrated by attaching them to the rosette frame of the CTD. Shallow CTD profiles were taken every two hours for 12 hours on the 25th of June. A fish trap was deployed on June 25th by John Yeh, a University of Hawaii graduate student. The WHOTS-3 mooring was deployed on 26 June at approximately 22°46'N, 157°54'W in 4703 m of water. A ship-buoy intercomparison period and series of shallow CTDs followed along with a second deployment of the fishtrap. A NOAA Teacher-At-Sea, Diana Griffiths, and a NOAA Hollings Scholar, Terry Smith, participated in the cruise. This report describes the mooring operations, some of the pre-cruise buoy preparations and CTD casts taken during the cruise, the fish trap deployments, and the experiences of the Teacher-at-Sea and Hollings Scholar.
  • Technical Report
    King Abdullah University of Science and Technology (KAUST) mooring deployment cruise and fieldwork report, fall 2008 R/V Oceanus voyage 449-5, October 9, 2008–October 14, 2008
    (Woods Hole Oceanographic Institution, 2009-07) Farrar, J. Thomas ; Lentz, Steven J. ; Churchill, James H. ; Bouchard, Paul R. ; Smith, Jason C. ; Kemp, John N. ; Lord, Jeffrey ; Allsup, Geoffrey P. ; Hosom, David S.
    King Abdullah University of Science and Technology (KAUST) is being built near Thuwal, Saudi Arabia with the goal of becoming a world-class, graduate-level research university. As a step toward this goal, KAUST has partnered with the Woods Hole Oceanographic Institution (WHOI) to undertake various studies of the oceanography of the Red Sea in order to establish a research program in ocean sciences by the time the university opens its doors in the fall of 2009. Two of the KAUST-WHOI research projects involve deployment of surface moorings and associated instrumentation to measure physical properties of the Red Sea, such as temperature, salinity, and currents, at four locations off the coast of Saudi Arabia. The goal of these measurements is to better understand the evolution and dynamics of the circulation and air-sea interaction in the Red Sea. Two surface moorings and two bottom tripods (PI, Steven Lentz) were deployed at 50-55-m depth near 21°57'N, 38°46'E over the continental shelf close to the Saudi coast. An additional surface mooring/bottom tripod pair was deployed near 21°58'N, 38°50'E at the outer fringe of a reef system directly onshore of the shelf mooring/tripod pairs (PI, Lentz). The coastal moorings carry instruments to estimate temperature, salinity, and fluorescence; and the nearby bottom tripods support instruments to measure bottom pressure and the vertical profile of the currents. Additional instruments, principally bottom temperature sensors, were deployed over the reef system onshore of the shelf moorings. One air-sea interaction mooring (PI, J. Thomas Farrar) was deployed at 693-m depth near 22°10'N, 38°30'E. The air-sea interaction mooring carries instruments for measuring temperature, salinity, (water) velocity, winds, air temperature, humidity, barometric pressure, incident sunlight, infrared radiation, precipitation, and surface waves. A coastal meteorological tower was also installed on the KAUST campus in Thuwal (PI, Farrar). These measurements are of value because there are few time series of oceanographic and meteorological properties of the Red Sea that can be used to characterize the circulation, test numerical models of the Red Sea circulation, or formulate theoretical models of the physics of the Red Sea circulation. These measurements will permit a characterization of the Red Sea circulation with high temporal resolution at the mooring locations, and accurate in-situ estimates of the air-sea exchange of heat, freshwater, and momentum. In October 2008, a cruise was made aboard the R/V Oceanus to deploy the shelf and air-sea interaction moorings, and other fieldwork (e.g., tower instrumentation and deployment of reef instrumentation) was conducted after the cruise. Some additional data were collected during the cruise with shipboard instrumentation. This report documents the cruise and the data collected during the fall 2008 fieldwork.
  • Technical Report
    Stratus Ocean Reference Station (20˚S, 85˚W), mooring recovery and deployment cruise R/V Ronald H. Brown cruise 05-05, September 26, 2005–October 21, 2005
    (Woods Hole Oceanographic Institution, 2006-02) Hutto, Lara ; Weller, Robert A. ; Lord, Jeffrey ; Smith, Jason C. ; Bouchard, Paul R. ; Fairall, Christopher W. ; Pezoa, Sergio ; Bariteau, Ludovic ; Lundquist, Jessica ; Ghate, Virendra P. ; Castro, Rodrigo ; Cisternas, Carolina
    The Ocean Reference Station at 20°S, 85°W under the stratus clouds west of northern Chile is being maintained to provide ongoing, climate-quality records of surface meteorology, of air-sea fluxes of heat, freshwater, and momentum, and of upper ocean temperature, salinity, and velocity variability. The Stratus Ocean Reference Station (ORS Stratus) is supported by the National Oceanic and Atmospheric Administration’s (NOAA) Climate Observation Program. It is recovered and redeployed annually, with cruises that have come between October and December. During the October 2005 cruise of NOAA’s R/V Ronald H. Brown to the ORS Stratus site, the primary activities were recovery of the WHOI surface mooring that had been deployed in December 2004, deployment of a new WHOI surface mooring at that site, in-situ calibration of the buoy meteorological sensors by comparison with instrumentation put on board by staff of the NOAA Environmental Technology Laboratory (ETL), and observations of the stratus clouds and lower atmosphere by NOAA ETL. The ORS Stratus buoys are equipped with two Improved Meteorological (IMET) systems, which provide surface wind speed and direction, air temperature, relative humidity, barometric pressure, incoming shortwave radiation, incoming longwave radiation, precipitation rate, and sea surface temperature. The IMET data are made available in near real time using satellite telemetry. The mooring line carries instruments to measure ocean salinity, temperature, and currents. The ETL instrumentation used during the 2005 cruise included cloud radar, radiosonde ballons, and sensors for mean and turbulent surface meteorology. In addition, two technicians from the University of Concepcion collected water samples for chemical analysis. Finally, the cruise hosted a teacher participating in NOAA’s Teacher at Sea Program.
  • Technical Report
    The Northwest Tropical Atlantic Station (NTAS) : NTAS-3 mooring turnaround cruise report
    (Woods Hole Oceanographic Institution, 2003-06) Plueddemann, Albert J. ; Ostrom, William M. ; Galbraith, Nancy R. ; Smith, Jason C. ; Ryder, James R. ; Holley, Jason J. ; Walsh, M. Alexander
    The Northwest Tropical Atlantic Station (NTAS) was established to address the need for accurate air-sea flux estimates and upper ocean measurements in a region with strong sea surface temperature anomalies and the likelihood of significant local air–sea interaction on interannual to decadal timescales. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 15°N, 51°W by successive mooring turnarounds. These observations will be used to investigate air–sea interaction processes related to climate variability. Deployment of the first (NTAS-1) and second (NTAS-2) moorings were documented in previous reports (Plueddemann et al., 2001, 2002). This report documents recovery of the NTAS-2 mooring and deployment of the NTAS-3 mooring at the same site. Both moorings used 3-meter discus buoys as the surface element. These buoys were outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 150 m of the mooring line were outfitted with oceanographic sensors for the measurement of temperature and velocity. The mooring turnaround was done on the WHOI R/V Oceanus, Cruise OC-385-5, by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution. The cruise took place between 12 and 23 February 2003. Deployment of the NTAS-3 mooring was on 15 February at approximately 14°49.5¢ N, 51°01.3¢ W in 4977 m of water. A 24- hour intercomparison period followed, after which the NTAS-2 mooring was recovered. This report describes these operations, as well as some of the pre-cruise buoy preparations.
  • Technical Report
    The Northwest Tropical Atlantic Station (NTAS) : NTAS-14 mooring turnaround cruise report
    (Woods Hole Oceanographic Institution, 2015-12) Bigorre, Sebastien P. ; Pietro, Benjamin ; Smith, Jason C. ; Morris, Ethan ; Plueddemann, Albert J.
    The Northwest Tropical Atlantic Station (NTAS) was established to address the need for accurate air-sea flux estimates and upper ocean measurements in a region with strong sea surface temperature anomalies and the likelihood of significant local air-sea interaction on interannual to decadal timescales. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 15°N, 51°W by successive mooring turnarounds. These observations are used to investigate air-sea interaction processes related to climate variability. The NTAS Ocean Reference Station (ORS NTAS) is supported by the National Oceanic and Atmospheric Administration’s (NOAA) Climate Observation Program. This report documents recovery of the NTAS-13 mooring and deployment of the NTAS-14 mooring at the same site. Both moorings used Surlyn foam buoys as the surface element. These buoys were outfitted with two Air-Sea Interaction Meteorology (ASIMET) systems. Each system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air-sea fluxes of heat, moisture and momentum. The upper 160 m of the mooring line were outfitted with oceanographic sensors for the measurement of temperature, salinity and velocity. The mooring turnaround was done by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution (WHOI), onboard R/V Endeavor, Cruise EN549. The cruise took place between December 5 and 21 December 2014. The NTAS-14 mooring was deployed on December 13, and immediately followed by a 36-hour intercomparison period during which data from the buoy, telemetered through Argos satellite system, and the ship’s meteorological and oceanographic data were monitored. The NTAS-13 buoy had parted on September 23 and was recovered on October 28 while drifting freely near Martinique. The rest of the mooring, which had fallen to the seafloor was recovered during EN549, on December 17. This report describes these operations, as well as other work done on the cruise and some of the pre-cruise buoy preparations. Other operations during EN549 consisted in the recovery and deployment of Pressure Inverted Echo Sounders (PIES) and the acoustic download of data from PIES and subsurface moorings that are part of the Meridional Overturning Variability Experiment (MOVE) array. MOVE is designed to monitor the integrated deep meridional flow in the tropical North Atlantic. Two Argo floats were also deployed during the cruise on behalf of the Argo group at WHOI.
  • Technical Report
    WHOI Hawaii Ocean Timeseries Station (WHOTS) : WHOTS-9 2012 mooring turnaround cruise report
    (Woods Hole Oceanographic Institution, 2013-03) Plueddemann, Albert J. ; Ryder, James R. ; Pietro, Benjamin ; Smith, Jason C. ; Duncombe Rae, Chris M. ; Lukas, Roger ; Nosse, Craig ; Snyder, Jefrey ; Bariteau, Ludovic ; Park, Sang-Jong ; Hashisaka, David ; Roth, Ethan ; Fumar, Cameron ; Andrews, Alison ; Seymour, Nicholas
    The Woods Hole Oceanographic Institution (WHOI) Hawaii Ocean Timeseries Site (WHOTS), 100 km north of Oahu, Hawaii, is intended to provide long-term, high-quality air-sea fluxes as a part of the NOAA Climate Observation Program. The WHOTS mooring also serves as a coordinated part of the Hawaii Ocean Timeseries (HOT) program, contributing to the goals of observing heat, fresh water and chemical fluxes at a site representative of the oligotrophic North Pacific Ocean. The approach is to maintain a surface mooring outfitted for meteorological and oceanographic measurements at a site near 22.75°N, 158°W by successive mooring turnarounds. These observations will be used to investigate air–sea interaction processes related to climate variability. This report documents recovery of the eighth WHOTS mooring (WHOTS-8) and deployment of the ninth mooring (WHOTS-9). Both moorings used Surlyn foam buoys as the surface element and were outfitted with two Air–Sea Interaction Meteorology (ASIMET) systems. Each ASIMET system measures, records, and transmits via Argos satellite the surface meteorological variables necessary to compute air–sea fluxes of heat, moisture and momentum. The upper 155 m of the moorings were outfitted with oceanographic sensors for the measurement of temperature, conductivity and velocity in a cooperative effort with R. Lukas of the University of Hawaii. A pCO2 system was installed on the buoys in cooperation with Chris Sabine at the Pacific Marine Environmental Laboratory. A set of radiometers were installed in cooperation with Sam Laney at WHOI. The WHOTS mooring turnaround was done on the NOAA ship Hi’ialakai by the Upper Ocean Processes Group of the Woods Hole Oceanographic Institution. The cruise took place between 12 and 19 June 2012. Operations began with deployment of the WHOTS-9 mooring on 13 June. This was followed by meteorological intercomparisons and CTDs. Recovery of the WHOTS-8 mooring took place on 16 June. This report describes these cruise operations, as well as some of the in-port operations and pre-cruise buoy preparations.