CTD calibration and processing methods used at Woods Hole Oceanographic Institution
Millard, Robert C.
MetadataShow full item record
Processing methods, programs, and procedures currently used to create CTD data sets at Woods Hole Oceanographic Institution (WHOI) are described. The post-acquisition data processing steps include instrument calibrations in the laboratory and data calibration at sea, CTD data transformation from a time series to a pressure series, and the water sample data processing using the World Ocean Circulation Experiment (WOCE) format guidelines. Processing software has been developed for both the Micro VAX and IBM compatible personal computers. The description of the data processing procedures is restricted to the PC system. The programs are written primarly in FORTRAN with some format-related changes required between computer systems.
Showing items related by title, author, creator and subject.
Fofonoff, Nick P.; Hayes, S. P.; Millard, Robert C. (Woods Hole Oceanographic Institution, 1974-12)This report describes calibration techniques developed over the past three years for the WHOI/Brown CTD in the Moored Array Program. Comparison is made with classical methods of hydrography for stations obtained in the ...
Tracy, Maren E.; Peltzer, Edward T.; Goyet, Catherine (Woods Hole Oceanographic Institution, 1994-02)Accurate measurement of partial pressure of CO2 in seawater is currently performed by measuring pC02 in an aliquot of a small volume of gas equilibrated with a large volume of the seawater to be measured. PC02 in the gas ...
Briggs, Michael Jeffrey (Massachusetts Institute of Technology and Woods Hole Oceanographic Institution, 1981-06)The multichannel Maximum Entropy Method (MEM) of spectral analysis is developed and applied in the dynamic analysis of offshore structures. Two different algorithms are implemented and compared with the conventional ...