Calibration sphere for low-frequency parametric sonars
Foote, Kenneth G.
Francis, David T. I.
Atkins, Philip R.
MetadataShow full item record
The problem of calibrating parametric sonar systems at low difference frequencies used in backscattering applications is addressed. A particular parametric sonar is considered: the Simrad TOPAS PS18 Parametric Sub-bottom Profiler. This generates difference-frequency signals in the band 0.5–6 kHz. A standard target is specified according to optimization conditions based on maximizing the target strength consistent with the target strength being independent of orientation and the target being physically manageable. The second condition is expressed as the target having an immersion weight less than 200 N. The result is a 280-mm-diam sphere of aluminum. Its target strength varies from −43.4 dB at 0.5 kHz to −20.2 dB at 6 kHz. Maximum excursions in target strength over the frequency band due to uncertainty in material properties of the sphere are of order ±0.1 dB. Maximum excursions in target strength due to variations in mass density and sound speed of the immersion medium are larger, but can be eliminated by attention to the hydrographic conditions. The results are also applicable to the standard-target calibration of conventional sonars operating at low-kilohertz frequencies.
Author Posting. © Acoustical Society of America, 2007. This article is posted here by permission of Acoustical Society of America for personal use, not for redistribution. The definitive version was published in Journal of the Acoustical Society of America 121 (2007): 1482-1490, doi:10.1121/1.2434244.
Suggested CitationArticle: Foote, Kenneth G., Francis, David T. I., Atkins, Philip R., "Calibration sphere for low-frequency parametric sonars", Journal of the Acoustical Society of America 121 (2007): 1482-1490, DOI:10.1121/1.2434244, https://hdl.handle.net/1912/2337
Showing items related by title, author, creator and subject.
Range compensation for backscattering measurements in the difference-frequency nearfield of a parametric sonar Foote, Kenneth G. (Acoustical Society of America, 2012-05)Measurement of acoustic backscattering properties of targets requires removal of the range dependence of echoes. This process is called range compensation. For conventional sonars making measurements in the transducer ...
Foote, Kenneth G.; Chu, Dezhang; Hammar, Terence R.; Baldwin, Kenneth C.; Mayer, Larry A.; Hufnagle, Lawrence C.; Jech, J. Michael (Acoustical Society of America, 2005-04)Development of protocols for calibrating multibeam sonar by means of the standard-target method is documented. Particular systems used in the development work included three that provide the water-column signals, namely ...
Godø, Olav Rune; Foote, Kenneth G.; Dybedal, Johnny (Acoustical Society of America, 2010-03-17)The difference-frequency band of the Kongsberg TOPAS PS18 parametric sub-bottom profiling sonar, nominally 1–6 kHz, is being used to observe Atlantic herring. Representative TOPAS echograms of herring layers and schools ...