Protocols for calibrating multibeam sonar
Foote, Kenneth G.
Hammar, Terence R.
Baldwin, Kenneth C.
Mayer, Larry A.
Hufnagle, Lawrence C.
Jech, J. Michael
MetadataShow full item record
KeywordSonar detection; Sonar target recognition; Underwater sound; Calibration; Array signal processing; Acoustic transducer arrays; Protocols
Development of protocols for calibrating multibeam sonar by means of the standard-target method is documented. Particular systems used in the development work included three that provide the water-column signals, namely the SIMRAD SM2000/90- and 200-kHz sonars and RESON SeaBat 8101 sonar, with operating frequency of 240 kHz. Two facilities were instrumented specifically for the work: a sea well at the Woods Hole Oceanographic Institution and a large, indoor freshwater tank at the University of New Hampshire. Methods for measuring the transfer characteristics of each sonar, with transducers attached, are described and illustrated with measurement results. The principal results, however, are the protocols themselves. These are elaborated for positioning the target, choosing the receiver gain function, quantifying the system stability, mapping the directionality in the plane of the receiving array and in the plane normal to the central axis, measuring the directionality of individual beams, and measuring the nearfield response. General preparations for calibrating multibeam sonars and a method for measuring the receiver response electronically are outlined. Advantages of multibeam sonar calibration and outstanding problems, such as that of validation of the performance of multibeam sonars as configured for use, are mentioned.
Author Posting. © Acoustical Society of America, 2005. This article is posted here by permission of Acoustical Society of America for personal use, not for redistribution. The definitive version was published in Journal of the Acoustical Society of America 117 (2005): 2013-2027, doi:10.1121/1.1869073.
Suggested CitationArticle: Foote, Kenneth G., Chu, Dezhang, Hammar, Terence R., Baldwin, Kenneth C., Mayer, Larry A., Hufnagle, Lawrence C., Jech, J. Michael, "Protocols for calibrating multibeam sonar", Journal of the Acoustical Society of America 117 (2005): 2013-2027, DOI:10.1121/1.1869073, https://hdl.handle.net/1912/2335
Showing items related by title, author, creator and subject.
Foote, Kenneth G.; Francis, David T. I.; Atkins, Philip R. (Acoustical Society of America, 2007-03)The problem of calibrating parametric sonar systems at low difference frequencies used in backscattering applications is addressed. A particular parametric sonar is considered: the Simrad TOPAS PS18 Parametric Sub-bottom ...
Foote, Kenneth G.; Hastings, Mardi C.; Ketten, Darlene R.; Lin, Ying-Tsong; Reidenberg, Joy S.; Rye, Kent (Acoustical Society of America, 2012-02)Potential physical effects of sonar transmissions on marine mammals were investigated by measuring pressure fields induced in a 119-kg, 211-cm-long, young adult male common dolphin (Delphinus delphis) cadaver. The specimen ...
Acoustic detection and quantification of benthic egg beds of the squid Loligo opalescens in Monterey Bay, California Foote, Kenneth G.; Hanlon, Roger T.; Iampietro, Pat J.; Kvitek, Rikk G. (Acoustical Society of America, 2006-02)The squid Loligo opalescens is a key species in the nearshore pelagic community of California, supporting the most valuable state marine fishery, yet the stock biomass is unknown. In southern Monterey Bay, extensive beds ...