Soule Samuel A.

No Thumbnail Available
Last Name
Soule
First Name
Samuel A.
ORCID

Search Results

Now showing 1 - 5 of 5
  • Article
    A record of eruption and intrusion at a fast spreading ridge axis : axial summit trough of the East Pacific Rise at 9–10°N
    (American Geophysical Union, 2009-10-22) Soule, Samuel A. ; Escartin, Javier E. ; Fornari, Daniel J.
    High-resolution side-scan sonar, near-bottom multibeam bathymetry, and deep-sea photo and bathymetry traverses are used to map the axial summit trough (AST) at the East Pacific Rise between 9 and 10°N. We define three ridge axis morphologic types: no AST, narrow AST, and wide AST, which characterize distinct ridge crest domains spanning tens of kilometers along strike. Near-bottom observations, modeling of deformation above intruding dikes, and comparisons to the geologic and geophysical structure of the ridge crest are used to develop a revised model of AST genesis and evolution. This model helps constrain the record of intrusive and extrusive magmatism and styles of lava deposition along the ridge crest at time scales from hundreds to tens of thousands of years. The grabens in the narrow-AST domain (9°43′–53′N) are consistent with deformation above the most recent (<10) diking events beneath the ridge crest. Frequent high–effusion rate extrusive volcanism in this domain (several eruptions every ∼100 years) overprints near-axis deformation and maintains a consistent AST width. The most recent eruption at the ridge crest occurred in this area and did not significantly modify the physical characteristics of the AST. The grabens in the wide-AST domain (9°23′–43′N) originated with similar dimensions to the narrow AST. Spreading, driven primarily by the intrusion of shallow dikes within a narrow axial zone, causes the initial graben bounding faults to migrate away from the axis. Infrequent extrusive volcanism (several eruptions every ∼1000 years) fills a portion of the subsidence that accumulates over time but does not significantly modify the width of the AST. Outside of these domains, lower–effusion rate constructional volcanism without efficient drain-back fills and erases the signature of the AST. The relative frequency of intrusive versus extrusive magmatic events controls the morphology of the ridge crest and appears to remain constant over millennial time scales within the domains we have identified; however, over longer time scales (∼10–25 ka), domain-specific intrusive-to-extrusive ratios do not appear to be fixed in space, resulting in a fairly consistent volcanic accretion over the length scale of the second-order ridge segment between 9°N and 10°N.
  • Article
    Navigational infrastructure at the East Pacific Rise 9°50′N area following the 2005–2006 eruption : seafloor benchmarks and near-bottom multibeam surveys
    (American Geophysical Union, 2008-11-06) Soule, Samuel A. ; Ferrini, Vicki L. ; Kinsey, James C. ; Fornari, Daniel J. ; Sellers, Cynthia J. ; White, Scott M. ; Von Damm, Karen L. ; Carbotte, Suzanne M.
    Four seafloor benchmarks were deployed with ROV Jason2 at frequently visited areas along the northern East Pacific Rise (NEPR) ridge crest near 9°50′N, within the Ridge2000 EPR integrated study site (ISS) bull's eye. When used in concert with established deep-ocean acoustic positioning techniques, these benchmarks provide navigational infrastructure to facilitate the integration of near-bottom data at this site by allowing efficient and quantitative coregistration of data and observations collected on multiple dives and over multiple cruises. High-resolution, near-bottom multibeam bathymetric surveys also were conducted along and across the ridge crest to provide a morphological and geological context for the benchmark areas. We describe the navigation and data processing techniques used to constrain the benchmark positions and outline operational details to effectively use benchmarks at this and other deep-ocean sites where multidisciplinary time series studies are conducted. The well-constrained positions of the benchmarks provide a consistent geospatial framework that can be used to limit navigational uncertainties during seafloor sampling and mapping programs and enable accurate spatial coregistration and integration of observations. These data are important to test a range of multidisciplinary hypotheses that seek to link geological, chemical, and biological processes associated with crustal accretion and energy transfer from the mantle to the hydrosphere at mid-ocean ridges.
  • Preprint
    Rapid ascent and emplacement of basaltic lava during the 2005–06 eruption of the East Pacific Rise at ca. 9°51′N as inferred from CO2 contents
    ( 2016-08) Gardner, James E. ; Jackson, B. A. ; Gonnermann, Helge ; Soule, Samuel A.
    Eruption rates at the mid–ocean ridges (MORs) are believed to strongly control the morphology and length of lava flows emplaced along the ridge axis, and thus the structure and porosity of the upper oceanic crust. Eruption rate also represents one of the few tools to gain insight into the driving pressures within sub-ridge magmatic systems. As eruption rate is inferred to vary systematically along the global mid-ocean ridge, understanding of how to assess eruption rate in submarine systems and how it maps to observable features of the ridge axis would provide a powerful tool to understand Earth's largest magmatic system. Eruption rates at MORs are poorly constrained, however, because of a lack of direct observations, preventing the duration of an eruption to be quantified. This study uses decompression experiments of MORB samples and numerical modeling of CO2 degassing to reconstruct the timescales for magma ascent and lava emplacement during the 2005–06 eruption of the East Pacific Rise at ca. 9°51’N. Samples collected from the lava flow are all supersaturated in dissolved CO2 contents, but CO2 decreases with distance from the vent, presumably as a consequence of progressive CO2 diffusion into growing bubbles. Samples collected at the vent contain ~105 vesicles per cm3. Pieces of these samples were experimentally heated to 1225°C at high pressure and then decompressed at controlled rates. Results, plus those from numerical modeling of diffusive bubble growth, indicate that magma rose from the axial magma chamber to the seafloor in ≤1 hour and at a rate of ≥2–3 km hr-1. Our modeling, as validated by experimental decompression of MORB samples with ~106 vesicles cm-3, also suggests that CO2 degassed from the melt within ~10–100 minutes as the vesicular lava traveled ~ 1.7 km along the seafloor, implying a volumetric flow rate on order of 103–4 m3 s-1. Given an ascent rate of ≥0.2 m s-1, the width of a rectangular dike feeding the lava would have been ~1–2 meters wide. MORB samples from the Pacific ridge are generally more supersaturated in dissolved CO2 than those from slower spreading Atlantic and Indian ridges. Our results suggest that Pacific MORBs ascend to the seafloor faster than Atlantic or Indian MORBs
  • Article
    Interplay between faults and lava flows in construction of the upper oceanic crust : the East Pacific Rise crest 9°25′–9°58′N
    (American Geophysical Union, 2007-06-07) Escartin, Javier E. ; Soule, Samuel A. ; Fornari, Daniel J. ; Tivey, Maurice A. ; Schouten, Hans A. ; Perfit, Michael R.
    The distribution of faults and fault characteristics along the East Pacific Rise (EPR) crest between 9°25′N and 9°58′N were studied using high-resolution side-scan sonar data and near-bottom bathymetric profiles. The resulting analysis shows important variations in the density of deformational features and tectonic strain estimates at young seafloor relative to older, sediment-covered seafloor of the same spreading age. We estimate that the expression of tectonic deformation and associated strain on “old” seafloor is ~5 times greater than that on “young” seafloor, owing to the frequent fault burial by recent lava flows. Thus the unseen, volcanically overprinted tectonic deformation may contribute from 30% to 100% of the ~300 m of subsidence required to fully build up the extrusive pile (Layer 2A). Many longer lava flows (greater than ~1 km) dam against inward facing fault scarps. This limits their length at distances of 1–2 km, which are coincident with where the extrusive layer acquires its full thickness. More than 2% of plate separation at the EPR is accommodated by brittle deformation, which consists mainly of inward facing faults (~70%). Faulting at the EPR crest occurs within the narrow, ~4 km wide upper crust that behaves as a brittle lid overlying the axial magma chamber. Deformation at greater distances off axis (up to 40 km) is accommodated by flexure of the lithosphere due to thermal subsidence, resulting in ~50% inward facing faults accommodating ~50% of the strain. On the basis of observed burial of faults by lava flows and damming of flows by fault scarps, we find that the development of Layer 2A is strongly controlled by low-relief growth faults that form at the ridge crest and its upper flanks. In turn, those faults have a profound impact on how lava flows are distributed along and across the ridge crest.
  • Article
    Effusive and explosive volcanism on the ultraslow-spreading Gakkel Ridge, 85°E
    (American Geophysical Union, 2012-10-06) Pontbriand, Claire W. ; Soule, Samuel A. ; Sohn, Robert A. ; Humphris, Susan E. ; Kunz, Clayton G. ; Singh, Hanumant ; Nakamura, Ko-ichi ; Jakobsson, Martin ; Shank, Timothy M.
    We use high-definition seafloor digital imagery and multibeam bathymetric data acquired during the 2007 Arctic Gakkel Vents Expedition (AGAVE) to evaluate the volcanic characteristics of the 85°E segment of the ultraslow spreading Gakkel Ridge (9 mm yr−1 full rate). Our seafloor imagery reveals that the axial valley is covered by numerous, small-volume (order ~1000 m3) lava flows displaying a range of ages and morphologies as well as unconsolidated volcaniclastic deposits with thicknesses up to 10 cm. The valley floor contains two prominent volcanic lineaments made up of axis-parallel ridges and small, cratered volcanic cones. The lava flows appear to have erupted from a number of distinct source vents within the ~12–15 km-wide axial valley. Only a few of these flows are fresh enough to have potentially erupted during the 1999 seismic swarm at this site, and these are associated with the Oden and Loke volcanic cones. We model the widespread volcaniclastic deposits we observed on the seafloor as having been generated by the explosive discharge of CO2 that accumulated in (possibly deep) crustal melt reservoirs. The energy released during explosive discharge, combined with the buoyant rise of hot fluid, lofted fragmented clasts of rapidly cooling magma into the water column, and they subsequently settled onto the seafloor as fall deposits surrounding the source vent.