Morford Jennifer L.

No Thumbnail Available
Last Name
First Name
Jennifer L.

Search Results

Now showing 1 - 2 of 2
  • Preprint
    A model for uranium, rhenium, and molybdenum diagenesis in marine sediments based on results from coastal locations
    ( 2008-12-31) Morford, Jennifer L. ; Martin, William R. ; Francois, Roger ; Carney, Caitlin M.
    The purpose of this research is to characterize the mobilization and immobilization processes that control the authigenic accumulation of uranium (U), rhenium (Re) and molybdenum (Mo) in marine sediments. We analyzed these redox– sensitive metals (RSM) in benthic chamber, pore water and solid phase samples at a site in Buzzards Bay, Massachusetts, U.S.A., which has high bottom water oxygen concentrations (230–300 mol/L) and high organic matter oxidation rates (390 mol C/cm2/y). The oxygen penetration depth varies from 2–9 mm below the sediment–water interface, but pore water sulfide is below detection (< 2M). The RSM pore water profiles are modeled with a steady–state diagenetic model that includes irrigation, which extends 10–20 cm below the sediment–water interface. To present a consistent description of trace metal diagenesis in marine sediments, RSM results from sediments in Buzzards Bay are compared with previous research from sulfidic sediments (Morford et al., GCA 71). Release of RSM to pore waters during the remineralization of solid phases occurs near the sediment–water interface at depths above the zone of authigenic RSM formation. This release occurs consistently for Mo at both sites, but only in the winter for Re in Buzzards Bay and intermittently for U. At the Buzzards Bay site, Re removal to the solid phase extends to the bottom of the profile, while the zone of removal is restricted to ~2–9 cm for U and Mo. Authigenic Re formation is independent of the anoxic remineralization rate, which is consistent with an abiotic removal mechanism. The rate of authigenic U formation and its modeled removal rate constant increase with increasing anoxic remineralization rates, and is consistent with U reduction being microbially mediated. Authigenic Mo formation is related to the formation of sulfidic microenvironments. The depth and extent of Mo removal from pore water is closely associated with the balance between iron and sulfate reduction and the consumption of pore water sulfide via iron sulfide formation. Pore water RSM reach constant asymptotic concentrations in sulfidic sediments, but only pore water Re is constant at depth in Buzzards Bay. The increases in pore water U at the Buzzards Bay site are consistent with addition via irrigation and subsequent upward diffusion to the removal zone. Deep pore water Mo concentrations exceed its bottom water concentration due to irrigation–induced oxidation and remobilization from the solid phase. In sulfidic sediments, there is no evidence for higher pore water U or Mo concentrations at depth due to the absence of irrigation and/or the presence of more stable authigenic RSM phases. There are good correlations between benthic fluxes and authigenic accumulation rates for U and Mo in sulfidic sediments. However, results from Buzzards Bay suggest irrigation ultimately results in the partial loss of U and Mo from the solid phase, with accumulation rates that are 20–30% of the modeled flux. Irrigation can augment (Re, possibly U) or compromise (U, Mo) authigenic accumulation in sediments, and is important when determining burial rates in continental margin sediments.
  • Preprint
    Uranium diagenesis in sediments underlying bottom waters with high oxygen content
    ( 2009-01-23) Morford, Jennifer L. ; Martin, William R. ; Carney, Caitlin M.
    We measured U in sediments (both pore waters and solid phase) from three locations on the middle Atlantic Bight (MAB) from the eastern margin of the United States: a northern location on the continental shelf off Massachusetts (OC426, 75 m water depth), and two southern locations off North Carolina (EN433-1, 647 m water depth and EN433-2, 2648 m water depth). These sediments underlie high oxygen bottom waters (250-270 μM), but become reducing below the sediment-water interface due to the relatively high organic carbon oxidation rates in sediments (EN433-1: 212 μmol C/cm2/y; OC426: 120±10 μmol C/cm2/y; EN433-2: 33 μmol C/cm2/y). Pore water oxygen goes to zero by 1.4-1.5 cm at EN433-1 and OC426 and slightly deeper oxygen penetration depths were measured at EN433-2 (~4 cm). All of the pore water profiles show removal of U from pore waters. Calculated pore water fluxes are greatest at EN433-1 (0.66±0.08 nmol/cm2/y) and less at EN433-2 and OC426 (0.24±0.05 and 0.13±0.05 nmol/cm2/y, respectively). Solid phase profiles show authigenic U enrichment in sediments from all three locations. The average authigenic U concentrations are greater at EN433-1 and OC426 (5.8±0.7 nmol/g and 5.4±0.2 nmol/g, respectively) relative to EN433-2 (4.1±0.8 nmol/g). This progression is consistent with their relative ordering of ‘reduction intensity’, with greatest reducing conditions in sediments from EN433-1, less at OC426 and least at EN433-2. The authigenic U accumulation rate is largest at EN433-1 (0.47±0.05 nmol/cm2/y), but the average among the three sites on the MAB is ~0.2 nmol/cm2/y. Pore water profiles suggest diffusive fluxes across the sediment-water interface that are 1.4-1.7 times greater than authigenic accumulation rates at EN433-1 and EN433-2. These differences are consistent with oxidation and loss of U from the solid phase via irrigation and/or bioturbation, which may compromise the sequestration of U in continental margin sediments that underlie bottom waters with high oxygen concentrations. Previous literature compilations that include data exclusively from locations where [O2]bw < 150 μM suggest compelling correlations between authigenic U accumulation and organic carbon flux to sediments or organic carbon burial rate. Sediments that underlie waters with high [O2]bw have lower authigenic U accumulation rates than would be predicted from relationships developed from results that include locations where [O2]bw < 150 μM.