Chauchat Julien

No Thumbnail Available
Last Name
Chauchat
First Name
Julien
ORCID
0000-0002-5979-0620

Search Results

Now showing 1 - 4 of 4
  • Article
    A numerical study of onshore ripple migration using a Eulerian two-phase model
    (American Geophysical Union, 2020-12-29) Salimi‐Tarazouj, Ali ; Hsu, Tian-Jian ; Traykovski, Peter A. ; Cheng, Zhen ; Chauchat, Julien
    A new modeling methodology for ripple dynamics driven by oscillatory flows using a Eulerian two‐phase flow approach is presented in order to bridge the research gap between near‐bed sediment transport via ripple migration and suspended load transport dictated by ripple induced vortices. Reynolds‐averaged Eulerian two‐phase equations for fluid phase and sediment phase are solved in a two‐dimensional vertical domain with a k‐ε closure for flow turbulence and particle stresses closures for short‐lived collision and enduring contact. The model can resolve full profiles of sediment transport without making conventional near‐bed load and suspended load assumptions. The model is validated with an oscillating tunnel experiment of orbital ripple driven by a Stokes second‐order (onshore velocity skewed) oscillatory flow with a good agreement in the flow velocity and sediment concentration. Although the suspended sediment concentration far from the ripple in the dilute region was underpredicted by the present model, the model predicts an onshore ripple migration rate that is in very good agreement with the measured value. Another orbital ripple case driven by symmetric sinusoidal oscillatory flow is also conducted to contrast the effect of velocity skewness. The model is able to capture a net offshore‐directed suspended load transport flux due to the asymmetric primary vortex consistent with laboratory observation. More importantly, the model can resolve the asymmetry of onshore‐directed near‐bed sediment flux associated with more intense boundary layer flow speed‐up during onshore flow cycle and sediment avalanching near the lee ripple flank which force the onshore ripple migration.
  • Article
    Eulerian two-phase model reveals the importance of wave period in ripple evolution and equilibrium geometry
    (American Geophysical Union, 2021-06-24) Salimi‐Tarazouj, Ali ; Hsu, Tian-Jian ; Traykovski, Peter A. ; Chauchat, Julien
    The evolution of ripple geometries and their equilibrium states due to different wave forcing parameters are investigated by a Reynolds-averaged two-phase model, SedFoam, in a two-dimensional domain. Modeled ripple geometries, for a given uniform grain diameter, show a good agreement with ripple predictors that include the wave period effect explicitly, in addition to the wave orbital excursion length (or wave orbital velocity amplitude). Furthermore, using a series of numerical experiments, the ripple's response to a step-change in the wave forcing is studied. The model is capable of simulating “splitting,” “sliding,” “merging,” and “protruding” as the ripples evolve to a new equilibrium state. The model can also simulate the transition to sheet flow in energetic wave conditions and ripple reformation from a nearly flat bed condition. Simulation results reveal that the equilibrium state is such that the “primary” vortices reach half of the ripple length. Furthermore, an analysis of the suspended load and near-bed load ratio in the equilibrium state indicates that in the orbital ripple regime, the near-bed load is dominant while the suspended load is conducive to the ripple decaying regime (suborbital ripples) and sheet flow condition.
  • Preprint
    An Eulerian two-phase model for steady sheet flow using large-eddy simulation methodology
    ( 2017-11-08) Cheng, Zhen ; Hsu, Tian-Jian ; Chauchat, Julien
    A three-dimensional Eulerian two-phase flow model for sediment transport in sheet flow conditions is presented. To resolve turbulence and turbulence-sediment interactions, the large-eddy simulation approach is adopted. Specifically, a dynamic Smagorinsky closure is used for the subgrid fluid and sediment stresses, while the subgrid contribution to the drag force is included using a drift velocity model with a similar dynamic procedure. The contribution of sediment stresses due to intergranular interactions is modeled by the kinetic theory of granular flow at low to intermediate sediment concentration, while at high sediment concentration of enduring contact, a phenomenological closure for particle pressure and frictional viscosity is used. The model is validated with a comprehensive high-resolution dataset of unidirectional steady sheet flow (Revil-Baudard et al., 2015, Journal of Fluid Mechanics, 767, 1–30). At a particle Stokes number of about 10, simulation results indicate a reduced von Kármán coefficient of κ ≈ 0.215 obtained from the fluid velocity profile. A fluid turbulence kinetic energy budget analysis further indicates that the drag-induced turbulence dissipation rate is significant in the sheet flow layer, while in the dilute transport layer, the pressure work plays a similar role as the buoyancy dissipation, which is typically used in the single-phase stratified flow formulation. The present model also reproduces the sheet layer thickness and mobile bed roughness similar to measured data. However, the resulting mobile bed roughness is more than two times larger than that predicted by the empirical formulae. Further analysis suggests that through intermittent turbulent motions near the bed, the resolved sediment Reynolds stress plays a major role in the enhancement of mobile bed roughness. Our analysis on near-bed intermittency also suggests that the turbulent ejection motions are highly correlated with the upward sediment suspension flux, while the turbulent sweep events are mostly associated with the downward sediment deposition flux.
  • Article
    A numerical study of sheet flow under monochromatic nonbreaking waves using a free surface resolving Eulerian two‐phase flow model
    (John Wiley & Sons, 2018-07-05) Kim, Yeulwoo ; Cheng, Zhen ; Hsu, Tian-Jian ; Chauchat, Julien
    We present a new methodology that is able to concurrently resolve free surface wavefield, bottom boundary layer, and sediment transport processes throughout the entire water column. The new model, called SedWaveFoam, is developed by integrating an Eulerian two‐phase model for sediment transport, SedFoam, and a surface wave solver, InterFoam/waves2Foam, in the OpenFOAM framework. SedWaveFoam is validated with a large wave flume data for sheet flow driven by monochromatic nonbreaking waves. To isolate the effect of free surface, SedWaveFoam results are contrasted with one‐dimensional‐vertical SedFoam results, where the latter represents the oscillating water tunnel condition. Results demonstrate that wave‐averaged total sediment fluxes in both models are onshore‐directed; however, this onshore transport is significantly enhanced under surface waves. Onshore‐directed near‐bed sediment flux is driven by a small mean current mainly associated with velocity skewness. More importantly, progressive wave streaming drives onshore transport mostly in suspended load region due to an intrawave sediment flux. Further analysis suggests that the enhanced onshore transport in suspended load is due to a “wave‐stirring” mechanism, which signifies a nonlinear interaction between waves, streaming currents, and sediment suspension. We present some preliminary efforts to parameterize the wave‐stirring mechanism in intrawave sediment transport formulations.