Gregg Patricia M.

No Thumbnail Available
Last Name
Gregg
First Name
Patricia M.
ORCID

Filters

2008 - 2009 2 2020 - 2022 3
4 1
5
Reset filters

Settings

Search Results

Now showing 1 - 5 of 5
  • Article
    Extreme heterogeneity in mid-ocean ridge mantle revealed in lavas from the 8 degrees 20 ' N near-axis seamount chain
    (American Geophysical Union, 2020-12-14) Anderson, Molly ; Wanless, V. Dorsey ; Perfit, Michael R. ; Conrad, Ethan ; Gregg, Patricia M. ; Fornari, Daniel J. ; Ridley, W. Ian
    Lavas that have erupted at near‐axis seamounts provide windows into mid‐ocean ridge mantle heterogeneity and melting systematics which are not easily observed on‐axis at fast‐spreading centers. Beneath ridges, most heterogeneity is obscured as magmas aggregate toward the ridge, where they efficiently mix and homogenize during transit and within shallow magma chambers prior to eruption. To understand the deeper magmatic processes contributing to oceanic crustal formation, we examine the compositions of lavas erupted along a chain of near‐axis seamounts and volcanic ridges perpendicular to the East Pacific Rise. We assess the chemistry of near‐ridge mantle using a ∼200 km‐long chain at ∼8°20′N. High‐resolution bathymetric maps are used with geochemical analyses of ∼300 basalts to evaluate the petrogenesis of lavas and the heterogeneity of mantle feeding these near‐axis eruptions. Major and trace element concentrations and radiogenic isotope ratios are highly variable on <1 km scales, and reveal a continuum of depleted, normal, and enriched basalts spanning the full range of ridge and seamount compositions in the northeast Pacific. There is no systematic compositional variability along the chain. Modeling suggests that depleted mid‐ocean ridge basalt (DMORB) lavas are produced by ∼5%–15% melting of a depleted mid‐ocean ridge (MOR) mantle. Normal mid‐ocean ridge basalts (NMORB) form from 5% to 15% melting of a slightly enriched MOR mantle. Enriched mid‐ocean ridge basalts (EMORB) range from <1% melting of 10% enriched mantle to >15% melting of 100% enriched mantle. The presence of all three lava types along the seamount chain, and on a single seamount closest to the ridge axis, confirms that the sub‐ridge mantle is much more heterogeneous than is commonly observed on‐axis and heterogeneity exists over small spatial scales.
  • Thesis
    The dynamics of oceanic transform faults : constraints from geophysical, geochemical, and geodynamical modeling
    (Massachusetts Institute of Technology and Woods Hole Oceanographic Institution, 2008-06) Gregg, Patricia M.
    Segmentation and crustal accretion at oceanic transform fault systems are investigated through a combination of geophysical data analysis and geodynamical and geochemical modeling. Chapter 1 examines the effect of fault segmentation on the maximum predicted earthquake magnitude of an oceanic transform fault system. Results of thermal modeling suggest that fault segmentation by intra-transform spreading centers (ITSC) drastically reduces the available brittle area of a transform fault and thus limits the available earthquake rupture area. Coulomb stress models suggest that long ITSCs will prohibit static stress interaction between segments of a transform system and further limit the maximum possible magnitude of a given transform fault earthquake. In Chapter 2, gravity anomalies from a global set of oceanic transform fault systems are investigated. Surprisingly, negative residual mantle Bouguer gravity anomalies are found within fastslipping transform fault domains. These gravity observations suggest a mass deficit within fast-slipping transform faults, which may result from porosity variations, mantle serpentinization, and/or crustal thickness variations. Two-dimensional forward modeling and the correlation of the negative gravity anomalies to bathymetric highs indicate crustal thickness excesses in these locations. Finally, in Chapter 3, mantle thermal and melting models for a visco-plastic rheology are developed to investigate the process of mantle melting and crustal accretion at ITSCs within segmented transform faults, and are applied to the Siqueiros transform fault system. Models in which melt migrates into the transform fault domain from a large region of the mantle best explain the gravity-derived crustal thickness variations observed at the Siqueiros transform. Furthermore, a mantle potential temperature of 1350ºC and fractional crystallization at depths of 9 – 15.5 km best explain the major element composition variation observed at the Siqueiros transform.
  • Article
    Relative timing of off‐axis volcanism from sediment thickness estimates on the 8°20’N seamount chain, East Pacific Rise
    (American Geophysical Union, 2022-08-06) Fabbrizzi, Andrea ; Parnell-Turner, Ross ; Gregg, Patricia M. ; Fornari, Daniel J. ; Perfit, Michael R. ; Wanless, V. Dorsey ; Anderson, Molly
    Volcanic seamount chains on the flanks of mid-ocean ridges record variability in magmatic processes associated with mantle melting over several millions of years. However, the relative timing of magmatism on individual seamounts along a chain can be difficult to estimate without in situ sampling and is further hampered by Ar40/Ar39 dating limitations. The 8°20’N seamount chain extends ∼170 km west from the fast-spreading East Pacific Rise (EPR), north of and parallel to the western Siqueiros fracture zone. Here, we use multibeam bathymetric data to investigate relationships between abyssal hill formation and seamount volcanism, transform fault slip, and tectonic rotation. Near-bottom compressed high-intensity radiated pulse, bathymetric, and sidescan sonar data collected with the autonomous underwater vehicle Sentry are used to test the hypothesis that seamount volcanism is age-progressive along the seamount chain. Although sediment on seamount flanks is likely to be reworked by gravitational mass-wasting and current activity, bathymetric relief and Sentry vehicle heading analysis suggest that sedimentary accumulations on seamount summits are likely to be relatively pristine. Sediment thickness on the seamounts' summits does not increase linearly with nominal crustal age, as would be predicted if seamounts were constructed proximal to the EPR axis and then aged as the lithosphere cooled and subsided away from the ridge. The thickest sediments are found at the center of the chain, implying the most ancient volcanism there, rather than on seamounts furthest from the EPR. The nonlinear sediment thickness along the 8°20’N seamounts suggests that volcanism can persist off-axis for several million years.
  • Article
    Melt generation, crystallization, and extraction beneath segmented oceanic transform faults
    (American Geophysical Union, 2009-11-13) Gregg, Patricia M. ; Behn, Mark D. ; Lin, Jian ; Grove, Timothy L.
    We examine mantle melting, fractional crystallization, and melt extraction beneath fast slipping, segmented oceanic transform fault systems. Three-dimensional mantle flow and thermal structures are calculated using a temperature-dependent rheology that incorporates a viscoplastic approximation for brittle deformation in the lithosphere. Thermal solutions are combined with the near-fractional, polybaric melting model of Kinzler and Grove (1992a, 1992b, 1993) to determine extents of melting, the shape of the melting regime, and major element melt composition. We investigate the mantle source region of intratransform spreading centers (ITSCs) using the melt migration approach of Sparks and Parmentier (1991) for two end-member pooling models: (1) a wide pooling region that incorporates all of the melt focused to the ITSC and (2) a narrow pooling region that assumes melt will not migrate across a transform fault or fracture zone. Assuming wide melt pooling, our model predictions can explain both the systematic crustal thickness excesses observed at intermediate and fast slipping transform faults as well as the deeper and lower extents of melting observed in the vicinity of several transform systems. Applying these techniques to the Siqueiros transform on the East Pacific Rise we find that both the viscoplastic rheology and wide melt pooling are required to explain the observed variations in gravity inferred crustal thickness. Finally, we show that mantle potential temperature Tp = 1350°C and fractional crystallization at depths of 9–15.5 km fit the majority of the major element geochemical data from the Siqueiros transform fault system.
  • Article
    The formation of the 8˚ 20’ N seamount chain, east pacific rise
    (Springer, 2022-11-10) Romano, Valentina ; Gregg, Patricia M. ; Zhan, Yan ; Fornari, Daniel J. ; Perfit, Michael R. ; Wanless, Dorsey ; Battaglia, Maurizio ; Anderson, Molly
    Near-axis seamounts provide a unique setting to investigate three-dimensional mantle processes associated with the formation of new oceanic crust and lithosphere. Here, we investigate the characteristics and evolution of the 8˚20’N Seamount Chain, a lineament of seamounts that extends ~ 175 km west of the East Pacific Rise (EPR) axis, just north of the fracture zone of the Siqueiros Transform Fault. Shipboard gravity, magnetic, and bathymetric data acquired in 2016 are utilized to constrain models of seamount emplacement and evolution. Geophysical observations indicate that these seamounts formed during four distinct episodes of volcanism coinciding with changes in regional plate motion that are also reflected in the development of intra-transform spreading centers (ITSCs) along the Siqueiros transform fault (Fornari et al. 1989; Pockalny et al. 1997). Although volcanism is divided into distinct segments, the magnetic data indicate continuous volcanic construction over long portions of the chain. Crustal thickness variations along the chain up to 0.75 km increase eastward, inferred from gravity measurements, suggest that plate reorganization has considerably impacted melt distribution in the area surrounding the Siqueiros-EPR ridge transform intersection. This appears to have resulted in increased volcanism and the formation of the 8˚20’N Seamounts. These findings indicate that melting processes in the mantle and subsequently the formation of new oceanic crust and lithosphere are highly sensitive to tectonic stress changes in the vicinity of fast-spreading transform fault offsets.