Anderson Steven P.

No Thumbnail Available
Last Name
Anderson
First Name
Steven P.
ORCID

Filters

1997 3
2 1
3
Reset filters

Settings
Subject: Coastal Mixing and Optics (CMO) Experiment ×

Search Results

Now showing 1 - 3 of 3
  • Technical Report
    Acquisition, description and evaluation of atmospheric model products for the coastal mixing and optics experiments
    (Woods Hole Oceanographic Institution, 1997-03) Baumgartner, Mark F. ; Anderson, Steven P.
    Numerical weather forecasting model products were acquired for use in the Coastal Mixing and Optics (CMO) Experiment to augment in situ observations of meteorological parameters (e.g., wind speed and direction, air temperature and relative humidity) at a moored array of buoys in the Middle Atlantic Bight. In this report, the Eta and Rapid Update Cycle (RUC) regional models are described and the two methods of acquisition via the Internet, the Internet Data Distribution (IDD) system and file transfer (FTP) from the NOAA Information Center's data server, are discussed. Processing and archival of the model data are also addressed. Data from the CMO central mooring and six National Data Buoy Center (NDBC) buoys in the Middle Atlantic bight were used to evaluate the accuracy of the model products. Comparisons between model and in situ wind speed, wind direction, barometrc pressure, air temperature and sea surface temperature were possible for all seven of the buoys. Since no moisture measurement was made from the NDBC buoys, comparisons of relative and specific humidity were only possible at the CMO buoy. Sensible and latent heat fluxes and global (net) radiation from the models were compared to estimates of heat fluxes and net radiation from the CMO central buoy.
  • Dataset
    Coastal mixing and optics moored array experiment
    (Woods Hole Oceanographic Institution, 1997-09) Baumgartner, Mark F. ; Anderson, Steven P.
    This 5 CDROM set contains in-situ and numerical weather prediction model data collected during the Coastal Mixing and Optics (CMO) Experiment. These data were analyzed in a manuscript entitled "Evaluation of NCEP regional numerical weather prediction model surface fields over the Middle Atlantic Bight" which can be found in Postscript format on CDROM 1 in the "paper" directory. Three NWP models (the early Eta, meso Eta and RUC-1) were evaluated using in-situ meteorological observations and air-sea flux estimates from the central CMO buoy and six NDBC buoys. Based on these evaluations, gridded air-sea flux fields for use in the CMO experiment were generated from the meso Eta model surface fields. Both the original and adjusted meso Eta model surface fields can be found in this CDROM set. CDROM 1 contains all of the in-situ measurements as well as the model data extracted at each of the moored buoys. CDROM 1 also contains the AVHRR 14 km SST analysis from NCEP, the GCIP incoming surface shortwave product, plots of the 0, 3, 6 and 9 hour adjusted meso Eta forecasts for both the meteorology and air-sea fluxes and two QuickTime animations of the adjusted meso Eta model fields. CDROMs 2 and 3 contain the meso Eta model surface data acquired from NCEP archives and reformatted from GRIB to NetCDF. CDROMs 4 and 5 contain the CMO air-sea flux fields derived from the meso Eta surface fields. The source code of the program used to generate the CMO flux fields is in the "code" directory on CDROM 1.
  • Technical Report
    Coastal mixing and optics experiment : mooring deployment cruise report R/V Oceanus cruise number 284 31 July-11 August 1996
    (Woods Hole Oceanographic Institution, 1997-08) Galbraith, Nancy R. ; Ostrom, William M. ; Way, Bryan S. ; Lentz, Steven J. ; Anderson, Steven P. ; Baumgartner, Mark F. ; Plueddemann, Albert J. ; Edson, James B.
    An array of moorings at four sites at a mid-shelf location in the mid-Atlantic Bight was deployed for a period of 10 months beginning in August 1996 as part of the Coastal Mixing and Optics Experiment (CMO), funded by the Office of Naval Research (ONR). The purpose of this array is to gather information to help identify and understand the vertical mixing processes influencing the evolution of the stratification over the shelf. The observations from this moored array will be used to investigate changes in the stratification in response to atmospheric forcing, surface gravity wave variabilty, surface and bottom boundary layer mixing, current shear, internal waves, and advection. This report describes the primary mooring deployments carried out by the Upper Ocean Processes (UOP) Group on the R/V Oceanus, sailing out of Woods Hole during July, August, and September of 1996.