http://lod.bco-dmo.org/id/dataset/559780
eng; USA
utf8
dataset
Highest level of data collection, from a common set of sensors or instrumentation, usually within the same research project
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
2015-06-03
ISO 19115-2 Geographic Information - Metadata - Part 2: Extensions for Imagery and Gridded Data
ISO 19115-2:2009(E)
Sample log from Jason-II dives for Sievert collected from the R/V Atlantis (AT26-10) in the East Pacific Rise, Pacific Ocean (Microbial Communities at Deep-Sea Vents project)
2015-05-26
publication
2015-05-26
revision
Marine Biological Laboratory/Woods Hole Oceanographic Institution Library (MBLWHOI DLA)
2021-02-18
publication
https://doi.org/10.26008/1912/bco-dmo.559780.1
Stefan M Sievert
Woods Hole Oceanographic Institution
principalInvestigator
Jeffrey S Seewald
Woods Hole Oceanographic Institution
principalInvestigator
Dr Craig Taylor
Woods Hole Oceanographic Institution
principalInvestigator
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
publisher
documentDigital
Cite this dataset as: Sievert, S. M., Taylor, C., Seewald, J. S. (2015) Sample log from Jason-II dives for Sievert collected from the R/V Atlantis (AT26-10) in the East Pacific Rise, Pacific Ocean (Microbial Communities at Deep-Sea Vents project). Biological and Chemical Oceanography Data Management Office (BCO-DMO). (Version 1) Version Date 2015-05-26 [if applicable, indicate subset used]. doi:10.26008/1912/bco-dmo.559780.1 [access date]
sample log from Jason-II dives for Sievert Dataset Description: Acquisition Description: <p>The taxonomic composition of the microbial community present in fluid samples and shipboard incubations conducted in gas-tight isobaric samplers (IGT) was investigated by sequencing 16S rRNA amplicons using 454 technology. Further, samples from shipboard incubations were taken to obtain cell counts, activity measurements using nano-scale secondary ion mass spectrometry (nanoSIMS), to determine bulk 13C-incoproration into biomass, and measure pH and the concentration of select chemicals (nitrate, ammonium, sulfide, hydrogen, methane, oxygen). On select samples obtained with the large volume pump (LVP), metagenomic, metaproteomic, and lipid biomarker analyses will be performed.</p>
<p>Samples were collected at several sites at the 9ºN deep-sea hydrothermal vent field on the East Pacific Rise. &nbsp;They included ROV Jason-II deployments&nbsp;J2-758, J2-759, J2-760, J2-761, J2-762. DNA was extracted following established protocols. We were able to successfully sequence 16S rRNA amplicons for Bacteria and Archaea from a total of 17 shipbaord incubations, 10 LVP samples, and one basalt rock sample. Sequence data are currently being analyzed and will be deposited in GenBank prior to publication and will be made available to the scientific community. From the incubations, the following analyses have been completed: total cell numbers, NanoSIMS analyses, <sup>13</sup>C-bulk organic carbon analysis, and chemical measurements. These data are currently being prepared for a manuscript and data will be publically released with the publication. Metagenomic sequencing, metaproteomic analyses, and lipid biomarker analysis of the LVP samples are currently underway. Data will be made available to the scientific community once the data processing is complete and data are published. This is expected to be the case in the first half of 2016.</p>
<p>16S rRNA amplicons for Bacteria and Archaea were generated using 454 sequence technology. Obtained sequences are currently being analyzed using the QIIME pipeline. The reads are being dereplicated, denoised, screened for chimeric sequences and taxonomically classified using the RDP and GreenGenes databases. Multivariate ordination techniques are being used to discriminate among samples with similar community structures. Total sulfide was determined by combining a 2mL sample with sulfide antioxidant buffer and measuring voltage with a sulfide-selective electrode. The electrode was calibrated daily with a serial dilution of a standard sodium sulfide solution. To account for oxidation of the sulfide solution, the solution was titrated daily with lead nitrate to determine the actual sulfide concentration. pH was measured using an electrode, which was calibrated daily. Methane and hydrogen were determined by quantitative headspace extraction of a known volume of sample and measured on a GC-FID (for methane and concentrations of hydrogen &gt; 5μM) or GC-TCD (for concentrations of hydrogen &lt;5μM). Oxygen was determined by passing hydrothermal fluid through a specially designed flow-through cell fitted with a commercially available oxygen optode (Pts3, Presens, Germany). Fluorescence lifetime decay was measured every second using a computerized system corrected for temperature effects (Fibox 3, Presens, Germany), and the most stable final oxygen value was used. The oxygen optode spot was calibrated once with oxygen-free water (treated with sodium dithionate) and air-saturated water to make a two-point calibration. Prior to measurements, the optode flow-through cell was flushed with N<sub>2</sub>-purged FBSW to remove air bubbles and connected to the IGT sample valve while both were dripping liquid to avoid entrainment of air bubbles in the sample chamber. For subsequent nutrient analysis, fluids were filtered through a 0.2µm GTTP membrane and stored frozen at -20<sup>o</sup>C. Total nitrate+nitrite was determined by conversion to NO and chemiluminescent determination using the NoxBox instrument (Teledyne, San Diego CA, USA) following the original protocol (Garside 1982). Similarly, filtered samples were analyzed shipboard for total ammonium+ammonia by flow injection as previously described. All standards were pure chemicals made up in distilled water. All analytes, with the exception of oxygen, were measured in analytical duplicates. Cells were prepared for counting by preserving 1.5mL of fluids with 40µL of borate-buffered formalin, and subsequently adding 200µL of 0.1% acridine orange solution. The fixed and stained sample was then filtered under gentle vacuum onto a black 0.2µm polycarbonate filter, and enumerated aboard the ship by fluorescence microscopy. 10 grids were counted per sample and extrapolated using the area filtered to determine cell concentrations. All counts were done in analytical duplicates.</p>
Funding provided by NSF Division of Ocean Sciences (NSF OCE) Award Number: OCE-1136727 Award URL: http://www.nsf.gov/awardsearch/showAward.do?AwardNumber=1136727
completed
Stefan M Sievert
Woods Hole Oceanographic Institution
508 289 2305
Biology Department Watson Bldg
Woods Hole
MA
02543
USA
ssievert@whoi.edu
pointOfContact
Jeffrey S Seewald
Woods Hole Oceanographic Institution
508-289-2966
Mail Stop #04 Fye 142A
Woods Hole
MA
02543
USA
jseewald@whoi.edu
pointOfContact
Dr Craig Taylor
Woods Hole Oceanographic Institution
508-289-2354
Mail Stop #52 Stanley W. Watson Laboratory for Biogeochemistry
Woods Hole
MA
02543
USA
ctaylor@whoi.edu
pointOfContact
asNeeded
Dataset Version: 1
Unknown
sample_num
cruise_id
dive
lat
lon
depth
date
sample_type
site
sample
collection_method
sample_description
analysis
Jason-II
Oxygen Optode
NoxBox instrument
theme
None, User defined
sample identification
cruise id
dive_id
latitude
longitude
depth
date
sample type
site
sampling_method
sample description
comments
featureType
BCO-DMO Standard Parameters
ROV Jason
Automated DNA Sequencer
Optode
Chemiluminescence NOx Analyzer
instrument
BCO-DMO Standard Instruments
AT26-10
service
Deployment Activity
East Pacific Rise, Pacific Ocean
place
Locations
otherRestrictions
otherRestrictions
Access Constraints: none. Use Constraints: Please follow guidelines at: http://www.bco-dmo.org/terms-use Distribution liability: Under no circumstances shall BCO-DMO be liable for any direct, incidental, special, consequential, indirect, or punitive damages that result from the use of, or the inability to use, the materials in this data submission. If you are dissatisfied with any materials in this data submission your sole and exclusive remedy is to discontinue use.
Dimensions of Biodiversity
http://www.nsf.gov/funding/pgm_summ.jsp?pims_id=503446
Dimensions of Biodiversity
(adapted from the NSF Synopsis of Program)
Dimensions of Biodiversity is a program solicitation from the NSF Directorate for Biological Sciences. FY 2010 was year one of the program. [MORE from NSF]
The NSF Dimensions of Biodiversity program seeks to characterize biodiversity on Earth by using integrative, innovative approaches to fill rapidly the most substantial gaps in our understanding. The program will take a broad view of biodiversity, and in its initial phase will focus on the integration of genetic, taxonomic, and functional dimensions of biodiversity. Project investigators are encouraged to integrate these three dimensions to understand the interactions and feedbacks among them. While this focus complements several core NSF programs, it differs by requiring that multiple dimensions of biodiversity be addressed simultaneously, to understand the roles of biodiversity in critical ecological and evolutionary processes.
Dimensions of Biodiversity
largerWorkCitation
program
Center for Dark Energy Biosphere Investigations
http://www.darkenergybiosphere.org
Center for Dark Energy Biosphere Investigations
The mission of the Center for Dark Energy Biosphere Investigations (C-DEBI) is to explore life beneath the seafloor and make transformative discoveries that advance science, benefit society, and inspire people of all ages and origins.
C-DEBI provides a framework for a large, multi-disciplinary group of scientists to pursue fundamental questions about life deep in the sub-surface environment of Earth. The fundamental science questions of C-DEBI involve exploration and discovery, uncovering the processes that constrain the sub-surface biosphere below the oceans, and implications to the Earth system. What type of life exists in this deep biosphere, how much, and how is it distributed and dispersed? What are the physical-chemical conditions that promote or limit life? What are the important oxidation-reduction processes and are they unique or important to humankind? How does this biosphere influence global energy and material cycles, particularly the carbon cycle? Finally, can we discern how such life evolved in geological settings beneath the ocean floor, and how this might relate to ideas about the origin of life on our planet?
C-DEBI's scientific goals are pursued with a combination of approaches:
(1) coordinate, integrate, support, and extend the research associated with four major programs—Juan de Fuca Ridge flank (JdF), South Pacific Gyre (SPG), North Pond (NP), and Dorado Outcrop (DO)—and other field sites;
(2) make substantial investments of resources to support field, laboratory, analytical, and modeling studies of the deep subseafloor ecosystems;
(3) facilitate and encourage synthesis and thematic understanding of submarine microbiological processes, through funding of scientific and technical activities, coordination and hosting of meetings and workshops, and support of (mostly junior) researchers and graduate students; and
(4) entrain, educate, inspire, and mentor an interdisciplinary community of researchers and educators, with an emphasis on undergraduate and graduate students and early-career scientists.
Note: Katrina Edwards was a former PI of C-DEBI; James Cowen is a former co-PI.
Data Management:
C-DEBI is committed to ensuring all the data generated are publically available and deposited in a data repository for long-term storage as stated in their Data Management Plan (PDF) and in compliance with the NSF Ocean Sciences Sample and Data Policy. The data types and products resulting from C-DEBI-supported research include a wide variety of geophysical, geological, geochemical, and biological information, in addition to education and outreach materials, technical documents, and samples. All data and information generated by C-DEBI-supported research projects are required to be made publically available either following publication of research results or within two (2) years of data generation.
To ensure preservation and dissemination of the diverse data-types generated, C-DEBI researchers are working with BCO-DMO Data Managers make data publicly available online. The partnership with BCO-DMO helps ensure that the C-DEBI data are discoverable and available for reuse. Some C-DEBI data is better served by specialized repositories (NCBI's GenBank for sequence data, for example) and, in those cases, BCO-DMO provides dataset documentation (metadata) that includes links to those external repositories.
C-DEBI
largerWorkCitation
program
An Integrated Study of Energy Metabolism, Carbon Fixation, and Colonization Mechanisms in Chemosynthetic Microbial Communities at Deep-Sea Vents
https://www.bco-dmo.org/project/2216
An Integrated Study of Energy Metabolism, Carbon Fixation, and Colonization Mechanisms in Chemosynthetic Microbial Communities at Deep-Sea Vents
<p></p><p>
Deep-sea hydrothermal vents, first discovered in 1977, are poster child ecosystems where microbial chemosynthesis rather than photosynthesis is the primary source of organic carbon. Significant gaps remain in our understanding of the underlying microbiology and biogeochemistry of these fascinating ecosystems. Missing are the identification of specific microorganisms mediating critical reactions in various geothermal systems, metabolic pathways used by the microbes, rates of the catalyzed reactions, amounts of organic carbon being produced, and the larger role of these ecosystems in global biogeochemical cycles. To fill these gaps, the investigators will conduct a 3-year interdisciplinary, international hypothesis-driven research program to understand microbial processes and their quantitative importance at deep-sea vents. Specifically, the investigators will address the following objectives: 1. Determine key relationships between the taxonomic, genetic and functional diversity, as well as the mechanisms of energy and carbon transfer, in deep-sea hydrothermal vent microbial communities. 2. Identify the predominant metabolic pathways and thus the main energy sources driving chemoautotrophic production in high and low temperature diffuse flow vents. 3. Determine energy conservation efficiency and rates of aerobic and anaerobic chemosynthetic primary productivity in high and low temperature diffuse flow vents. 4. Determine gene expression patterns in diffuse-flow vent microbial communities during attachment to substrates and the development of biofilms.
</p>
<p>
Integration: To address these objectives and to characterize the complexity of microbially-catalyzed processes at deep-sea vents at a qualitatively new level, we will pursue an integrated approach that couples an assessment of taxonomic diversity using cultivation-dependent and -independent approaches with methodologies that address genetic diversity, including a) metagenomics (genetic potential and diversity of community), b) single cell genomics (genetic potential and diversity of uncultured single cells), c) meta-transcriptomics and -proteomics (identification and function of active community members, realized potential of the community). To assess function and response to the environment, these approaches will be combined with 1) measurement of in situ rates of chemoautotrophic production, 2) geochemical characterization of microbial habitats, and 3) shipboard incubations under simulated in situ conditions (hypothesis testing under controlled physicochemical conditions). Network approaches and mathematical simulation will be used to reconstruct the metabolic network of the natural communities. A 3-day long project meeting towards the end of the second year will take place in Woods Hole. This Data Integration and Synthesis meeting will allow for progress reports and presentations from each PI, postdoc, and/or student, with the aim of synthesizing data generated to facilitate the preparation of manuscripts.
</p>
<p>
Intellectual Merit. Combining the community expression profile with diversity and metagenomic analyses as well as process and habitat characterization will be unique to hydrothermal vent microbiology. The approach will provide new insights into the functioning of deep-sea vent microbial communities and the constraints regulating the interactions between the microbes and their abiotic and biotic environment, ultimately enabling us to put these systems into a quantitative framework and thus a larger global context.
</p>
<p>
Broader Impacts. This is an interdisciplinary and collaborative effort between 4 US and 4 foreign institutions, creating unique opportunities for networking and fostering international collaborations. This will also benefit the involved students (2 graduate, several undergraduate) and 2 postdoctoral associates. This project will directly contribute to many educational and public outreach activities of the involved PIs, including the WHOI Dive & Discover program; single cell genomics workshops and Cafe Scientifique (Bigelow); REU (WHOI, Bigelow, CIW); COSEE and RIOS (Rutgers), and others. The proposed research fits with the focus of a number of multidisciplinary and international initiatives, in which PIs are active members (SCOR working group on Hydrothermal energy and the ocean carbon cycle, <a href="http://www.scorint">http://www.scorint</a>. org/Working_Groups/wg135.htm; Deep Carbon Observatory at CIW, <a href="https://dco.gl.ciw.edu/;">https://dco.gl.ciw.edu/;</a> Global Biogeochemical Flux (GBF) component of the Ocean Observatories Initiative (OOI), <a href="http://www.whoi.edu/GBF-OOI/page.do?pid=41475">http://www.whoi.edu/GBF-OOI/page.do?pid=41475</a>)
</p>
Microbial Communities at Deep-Sea Vents
largerWorkCitation
project
eng; USA
biota
oceans
East Pacific Rise, Pacific Ocean
-106.2915
-104.279
9.7708
11.8398
2014-01-03
2014-01-19
0
BCO-DMO catalogue of parameters from Sample log from Jason-II dives for Sievert collected from the R/V Atlantis (AT26-10) in the East Pacific Rise, Pacific Ocean (Microbial Communities at Deep-Sea Vents project)
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
http://lod.bco-dmo.org/id/dataset-parameter/559790.rdf
Name: sample_num
Units: unitless
Description: sequential sample number
http://lod.bco-dmo.org/id/dataset-parameter/559791.rdf
Name: cruise_id
Units: unitless
Description: cruise identification
http://lod.bco-dmo.org/id/dataset-parameter/559792.rdf
Name: dive
Units: unitless
Description: Jason-II dive number
http://lod.bco-dmo.org/id/dataset-parameter/559793.rdf
Name: lat
Units: decimal degrees
Description: latitude; north is positive
http://lod.bco-dmo.org/id/dataset-parameter/559794.rdf
Name: lon
Units: decimal degrees
Description: longitude; east is positive
http://lod.bco-dmo.org/id/dataset-parameter/559795.rdf
Name: depth
Units: meters
Description: sample depth
http://lod.bco-dmo.org/id/dataset-parameter/559796.rdf
Name: date
Units: yyyy-mm-dd
Description: sampling date, UTC
http://lod.bco-dmo.org/id/dataset-parameter/559797.rdf
Name: sample_type
Units: unitless
Description: sample type: fluid or rock
http://lod.bco-dmo.org/id/dataset-parameter/559798.rdf
Name: site
Units: unitless
Description: sampling site
http://lod.bco-dmo.org/id/dataset-parameter/559799.rdf
Name: sample
Units: unitless
Description: sampe id
http://lod.bco-dmo.org/id/dataset-parameter/559800.rdf
Name: collection_method
Units: unitless
Description: collection method: IGT=Isobaric Gastight Sampler ; LVP=Large Volume Pump
http://lod.bco-dmo.org/id/dataset-parameter/559801.rdf
Name: sample_description
Units: unitless
Description: description of the sample taken
http://lod.bco-dmo.org/id/dataset-parameter/559802.rdf
Name: analysis
Units: unitless
Description: types of analysis performed on the sample
GB/NERC/BODC > British Oceanographic Data Centre, Natural Environment Research Council, United Kingdom
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
https://www.bco-dmo.org/dataset/559780/data/download
download
onLine
dataset
<p>The taxonomic composition of the microbial community present in fluid samples and shipboard incubations conducted in gas-tight isobaric samplers (IGT) was investigated by sequencing 16S rRNA amplicons using 454 technology. Further, samples from shipboard incubations were taken to obtain cell counts, activity measurements using nano-scale secondary ion mass spectrometry (nanoSIMS), to determine bulk 13C-incoproration into biomass, and measure pH and the concentration of select chemicals (nitrate, ammonium, sulfide, hydrogen, methane, oxygen). On select samples obtained with the large volume pump (LVP), metagenomic, metaproteomic, and lipid biomarker analyses will be performed.</p>
<p>Samples were collected at several sites at the 9ºN deep-sea hydrothermal vent field on the East Pacific Rise. &nbsp;They included ROV Jason-II deployments&nbsp;J2-758, J2-759, J2-760, J2-761, J2-762. DNA was extracted following established protocols. We were able to successfully sequence 16S rRNA amplicons for Bacteria and Archaea from a total of 17 shipbaord incubations, 10 LVP samples, and one basalt rock sample. Sequence data are currently being analyzed and will be deposited in GenBank prior to publication and will be made available to the scientific community. From the incubations, the following analyses have been completed: total cell numbers, NanoSIMS analyses, <sup>13</sup>C-bulk organic carbon analysis, and chemical measurements. These data are currently being prepared for a manuscript and data will be publically released with the publication. Metagenomic sequencing, metaproteomic analyses, and lipid biomarker analysis of the LVP samples are currently underway. Data will be made available to the scientific community once the data processing is complete and data are published. This is expected to be the case in the first half of 2016.</p>
<p>16S rRNA amplicons for Bacteria and Archaea were generated using 454 sequence technology. Obtained sequences are currently being analyzed using the QIIME pipeline. The reads are being dereplicated, denoised, screened for chimeric sequences and taxonomically classified using the RDP and GreenGenes databases. Multivariate ordination techniques are being used to discriminate among samples with similar community structures. Total sulfide was determined by combining a 2mL sample with sulfide antioxidant buffer and measuring voltage with a sulfide-selective electrode. The electrode was calibrated daily with a serial dilution of a standard sodium sulfide solution. To account for oxidation of the sulfide solution, the solution was titrated daily with lead nitrate to determine the actual sulfide concentration. pH was measured using an electrode, which was calibrated daily. Methane and hydrogen were determined by quantitative headspace extraction of a known volume of sample and measured on a GC-FID (for methane and concentrations of hydrogen &gt; 5μM) or GC-TCD (for concentrations of hydrogen &lt;5μM). Oxygen was determined by passing hydrothermal fluid through a specially designed flow-through cell fitted with a commercially available oxygen optode (Pts3, Presens, Germany). Fluorescence lifetime decay was measured every second using a computerized system corrected for temperature effects (Fibox 3, Presens, Germany), and the most stable final oxygen value was used. The oxygen optode spot was calibrated once with oxygen-free water (treated with sodium dithionate) and air-saturated water to make a two-point calibration. Prior to measurements, the optode flow-through cell was flushed with N<sub>2</sub>-purged FBSW to remove air bubbles and connected to the IGT sample valve while both were dripping liquid to avoid entrainment of air bubbles in the sample chamber. For subsequent nutrient analysis, fluids were filtered through a 0.2µm GTTP membrane and stored frozen at -20<sup>o</sup>C. Total nitrate+nitrite was determined by conversion to NO and chemiluminescent determination using the NoxBox instrument (Teledyne, San Diego CA, USA) following the original protocol (Garside 1982). Similarly, filtered samples were analyzed shipboard for total ammonium+ammonia by flow injection as previously described. All standards were pure chemicals made up in distilled water. All analytes, with the exception of oxygen, were measured in analytical duplicates. Cells were prepared for counting by preserving 1.5mL of fluids with 40µL of borate-buffered formalin, and subsequently adding 200µL of 0.1% acridine orange solution. The fixed and stained sample was then filtered under gentle vacuum onto a black 0.2µm polycarbonate filter, and enumerated aboard the ship by fluorescence microscopy. 10 grids were counted per sample and extrapolated using the area filtered to determine cell concentrations. All counts were done in analytical duplicates.</p>
Specified by the Principal Investigator(s)
asNeeded
7.x-1.1
Biological and Chemical Oceanography Data Management Office (BCO-DMO)
Unavailable
508-289-2009
WHOI MS#36
Woods Hole
MA
02543
USA
info@bco-dmo.org
http://www.bco-dmo.org
Monday - Friday 8:00am - 5:00pm
For questions regarding this resource, please contact BCO-DMO via the email address provided.
pointOfContact
Jason-II
Jason-II
PI Supplied Instrument Name: Jason-II Instrument Name: ROV Jason Instrument Short Name:ROV Jason Instrument Description: The Remotely Operated Vehicle (ROV) Jason is operated by the Deep Submergence Laboratory (DSL) at Woods Hole Oceanographic Institution (WHOI). WHOI engineers and scientists designed and built the ROV Jason to give scientists access to the seafloor that didn't require them leaving the deck of the ship. Jason is a two-body ROV system. A 10-kilometer (6-mile) fiber-optic cable delivers electrical power and commands from the ship through Medea and down to Jason, which then returns data and live video imagery. Medea serves as a shock absorber, buffering Jason from the movements of the ship, while providing lighting and a bird’s eye view of the ROV during seafloor operations. During each dive (deployment of the ROV), Jason pilots and scientists work from a control room on the ship to monitor Jason’s instruments and video while maneuvering the vehicle and optionally performing a variety of sampling activities. Jason is equipped with sonar imagers, water samplers, video and still cameras, and lighting gear. Jason’s manipulator arms collect samples of rock, sediment, or marine life and place them in the vehicle’s basket or on "elevator" platforms that float heavier loads to the surface. More information is available from the operator site at URL.
PI Supplied Instrument Name: Instrument Name: Automated DNA Sequencer Instrument Short Name:Automated Sequencer Instrument Description: General term for a laboratory instrument used for deciphering the order of bases in a strand of DNA. Sanger sequencers detect fluorescence from different dyes that are used to identify the A, C, G, and T extension reactions. Contemporary or Pyrosequencer methods are based on detecting the activity of DNA polymerase (a DNA synthesizing enzyme) with another chemoluminescent enzyme. Essentially, the method allows sequencing of a single strand of DNA by synthesizing the complementary strand along it, one base pair at a time, and detecting which base was actually added at each step.
Oxygen Optode
Oxygen Optode
PI Supplied Instrument Name: Oxygen Optode PI Supplied Instrument Description:Fibox 3/Pts3, Presens, Germany Instrument Name: Optode Instrument Short Name: Instrument Description: An optode or optrode is an optical sensor device that optically measures a specific substance usually with the aid of a chemical transducer.
NoxBox instrument
NoxBox instrument
PI Supplied Instrument Name: NoxBox instrument PI Supplied Instrument Description:For nitrate+nitrite measurement. Teledyne, San Diego CA, USA Instrument Name: Chemiluminescence NOx Analyzer Instrument Short Name: Instrument Description: The chemiluminescence method for gas analysis of oxides of nitrogen relies on the measurement of light produced by the gas-phase titration of nitric oxide and ozone. A chemiluminescence analyzer can measure the concentration of NO/NO2/NOX.
One example is the Teledyne Model T200: http://www.teledyne-api.com/products/T200.asp
Cruise: AT26-10
AT26-10
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel
AT26-10
Stefan M Sievert
Woods Hole Oceanographic Institution
http://dmoserv3.bco-dmo.org/data_docs/Microbe_Vent_Communities/AT26-10_Cruise_Report_v2_2015-07-09.pdf
Report describing AT26-10
R/V Atlantis
Community Standard Description
International Council for the Exploration of the Sea
R/V Atlantis
vessel