* Sea-Bird SBE 9 Data File:
* FileName = C:\data\ctd\at3901001.hdr
* Software Version Seasave V 7.23.2
* Temperature SN = 2265
* Conductivity SN = 2670
* Number of Bytes Per Scan = 40
* Number of Voltage Words = 5
* Number of Scans Averaged by the Deck Unit = 1
* System UpLoad Time = Oct 14 2017 12:30:50
* NMEA Latitude = 22 48.05 N
* NMEA Longitude = 046 03.31 W
* NMEA UTC (Time) = Oct 14 2017  12:30:45
* Store Lat/Lon Data = Append to Every Scan
* System UTC = Oct 14 2017 12:30:50
# nquan = 18
# nvalues = 4297                        
# units = specified
# name 0 = prDM: Pressure, Digiquartz [db]
# name 1 = t090C: Temperature [ITS-90, deg C]
# name 2 = t190C: Temperature, 2 [ITS-90, deg C]
# name 3 = c0S/m: Conductivity [S/m]
# name 4 = c1S/m: Conductivity, 2 [S/m]
# name 5 = sbeox0V: Oxygen raw, SBE 43 [V]
# name 6 = CStarTr0: Beam Transmission, WET Labs C-Star [%]
# name 7 = flECO-AFL: Fluorescence, WET Labs ECO-AFL/FL [mg/m^3]
# name 8 = turbWETntu0: Turbidity, WET Labs ECO [NTU]
# name 9 = depSM: Depth [salt water, m], lat = 22.8008
# name 10 = density00: Density [density, kg/m^3]
# name 11 = density11: Density, 2 [density, kg/m^3]
# name 12 = sal00: Salinity, Practical [PSU]
# name 13 = sal11: Salinity, Practical, 2 [PSU]
# name 14 = svCM: Sound Velocity [Chen-Millero, m/s]
# name 15 = svCM1: Sound Velocity, 2 [Chen-Millero, m/s]
# name 16 = sbeox0Mm/Kg: Oxygen, SBE 43 [umol/kg], WS = 2
# name 17 = flag: flag
# span 0 =     24.153,   4392.173       
# span 1 =     2.4443,    28.3224       
# span 2 =     2.4444,    27.4839       
# span 3 =   3.263609,   5.957812       
# span 4 =   3.263700,   5.927895       
# span 5 =     1.2612,     2.4782       
# span 6 =    96.9322,    98.9028       
# span 7 =    -0.0936,     0.3491       
# span 8 =     0.0212,     0.1116       
# span 9 =     24.000,   4320.000       
# span 10 =  1020.6491,  1047.5340      
# span 11 =  1024.2288,  1047.5344      
# span 12 =    32.6791,    37.7745      
# span 13 =    34.8913,    37.5537      
# span 14 =    1492.38,    1543.55      
# span 15 =    1492.39,    1543.35      
# span 16 =    116.739,    233.645      
# span 17 = 0.0000e+00, 0.0000e+00      
# interval = meters: 1                  
# start_time = Oct 14 2017 12:30:45 [NMEA time, header]
# bad_flag = -9.990e-29
# <Sensors count="15" >
#   <sensor Channel="1" >
#     <!-- Frequency 0, Temperature -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>2265</SerialNumber>
#       <CalibrationDate>11-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.33180814e-003</G>
#       <H>6.43843418e-004</H>
#       <I>2.35638501e-005</I>
#       <J>2.22412609e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="2" >
#     <!-- Frequency 1, Conductivity -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2670</SerialNumber>
#       <CalibrationDate>14-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-9.76668185e+000</G>
#         <H>1.30706976e+000</H>
#         <I>-3.47412812e-004</I>
#         <J>1.01242880e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="3" >
#     <!-- Frequency 2, Pressure, Digiquartz with TC -->
#     <PressureSensor SensorID="45" >
#       <SerialNumber>0749</SerialNumber>
#       <CalibrationDate>08-Apr-14</CalibrationDate>
#       <C1>-4.970438e+004</C1>
#       <C2>-4.005750e-001</C2>
#       <C3>1.365700e-002</C3>
#       <D1>3.669600e-002</D1>
#       <D2>0.000000e+000</D2>
#       <T1>3.027760e+001</T1>
#       <T2>-4.522040e-004</T2>
#       <T3>4.002070e-006</T3>
#       <T4>1.971140e-009</T4>
#       <Slope>0.99992397</Slope>
#       <Offset>-1.86008</Offset>
#       <T5>0.000000e+000</T5>
#       <AD590M>1.283700e-002</AD590M>
#       <AD590B>-8.706643e+000</AD590B>
#     </PressureSensor>
#   </sensor>
#   <sensor Channel="4" >
#     <!-- Frequency 3, Temperature, 2 -->
#     <TemperatureSensor SensorID="55" >
#       <SerialNumber>4148</SerialNumber>
#       <CalibrationDate>11-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <A>0.00000000e+000</A>
#       <B>0.00000000e+000</B>
#       <C>0.00000000e+000</C>
#       <D>0.00000000e+000</D>
#       <F0_Old>0.000</F0_Old>
#       <G>4.37331760e-003</G>
#       <H>6.61226926e-004</H>
#       <I>2.43591904e-005</I>
#       <J>2.05481777e-006</J>
#       <F0>1000.000</F0>
#       <Slope>1.00000000</Slope>
#       <Offset>0.0000</Offset>
#     </TemperatureSensor>
#   </sensor>
#   <sensor Channel="5" >
#     <!-- Frequency 4, Conductivity, 2 -->
#     <ConductivitySensor SensorID="3" >
#       <SerialNumber>2770</SerialNumber>
#       <CalibrationDate>14-Mar-17</CalibrationDate>
#       <UseG_J>1</UseG_J>
#       <!-- Cell const and series R are applicable only for wide range sensors. -->
#       <SeriesR>0.0000</SeriesR>
#       <CellConst>2000.0000</CellConst>
#       <ConductivityType>0</ConductivityType>
#       <Coefficients equation="0" >
#         <A>0.00000000e+000</A>
#         <B>0.00000000e+000</B>
#         <C>0.00000000e+000</C>
#         <D>0.00000000e+000</D>
#         <M>0.0</M>
#         <CPcor>-9.57000000e-008</CPcor>
#       </Coefficients>
#       <Coefficients equation="1" >
#         <G>-1.00880142e+001</G>
#         <H>1.48322515e+000</H>
#         <I>-3.93661281e-003</I>
#         <J>3.52192948e-004</J>
#         <CPcor>-9.57000000e-008</CPcor>
#         <CTcor>3.2500e-006</CTcor>
#         <!-- WBOTC not applicable unless ConductivityType = 1. -->
#         <WBOTC>0.00000000e+000</WBOTC>
#       </Coefficients>
#       <Slope>1.00000000</Slope>
#       <Offset>0.00000</Offset>
#     </ConductivitySensor>
#   </sensor>
#   <sensor Channel="6" >
#     <!-- A/D voltage 0, Free -->
#   </sensor>
#   <sensor Channel="7" >
#     <!-- A/D voltage 1, Oxygen, SBE 43 -->
#     <OxygenSensor SensorID="38" >
#       <SerialNumber>0444</SerialNumber>
#       <CalibrationDate>30-Mar-17</CalibrationDate>
#       <Use2007Equation>1</Use2007Equation>
#       <CalibrationCoefficients equation="0" >
#         <!-- Coefficients for Owens-Millard equation. -->
#         <Boc>0.0000</Boc>
#         <Soc>0.0000e+000</Soc>
#         <offset>0.0000</offset>
#         <Pcor>0.00e+000</Pcor>
#         <Tcor>0.0000</Tcor>
#         <Tau>0.0</Tau>
#       </CalibrationCoefficients>
#       <CalibrationCoefficients equation="1" >
#         <!-- Coefficients for Sea-Bird equation - SBE calibration in 2007 and later. -->
#         <Soc>5.3257e-001</Soc>
#         <offset>-0.4990</offset>
#         <A>-4.6883e-003</A>
#         <B> 2.2572e-004</B>
#         <C>-3.4371e-006</C>
#         <D0> 2.5826e+000</D0>
#         <D1> 1.92634e-004</D1>
#         <D2>-4.64803e-002</D2>
#         <E> 3.6000e-002</E>
#         <Tau20> 1.0900</Tau20>
#         <H1>-3.3000e-002</H1>
#         <H2> 5.0000e+003</H2>
#         <H3> 1.4500e+003</H3>
#       </CalibrationCoefficients>
#     </OxygenSensor>
#   </sensor>
#   <sensor Channel="8" >
#     <!-- A/D voltage 2, Transmissometer, WET Labs C-Star -->
#     <WET_LabsCStar SensorID="71" >
#       <SerialNumber>CST-854DR</SerialNumber>
#       <CalibrationDate>8Dec16</CalibrationDate>
#       <M>21.7440</M>
#       <B>-1.2610</B>
#       <PathLength>0.250</PathLength>
#     </WET_LabsCStar>
#   </sensor>
#   <sensor Channel="9" >
#     <!-- A/D voltage 3, PAR/Irradiance, Biospherical/Licor -->
#     <PAR_BiosphericalLicorChelseaSensor SensorID="42" >
#       <SerialNumber>QSP200L4S-4553</SerialNumber>
#       <CalibrationDate>21Nov2016</CalibrationDate>
#       <M>1.00000000</M>
#       <B>0.00000000</B>
#       <CalibrationConstant>3448000000.00000000</CalibrationConstant>
#       <Multiplier>1.00000000</Multiplier>
#       <Offset>-0.38230000</Offset>
#     </PAR_BiosphericalLicorChelseaSensor>
#   </sensor>
#   <sensor Channel="10" >
#     <!-- A/D voltage 4, Fluorometer, WET Labs ECO-AFL/FL -->
#     <FluoroWetlabECO_AFL_FL_Sensor SensorID="20" >
#       <SerialNumber>FLTURT-964</SerialNumber>
#       <CalibrationDate>2016-Nov-22</CalibrationDate>
#       <ScaleFactor>1.10000000e+001</ScaleFactor>
#       <!-- Dark output -->
#       <Vblank>0.0610</Vblank>
#     </FluoroWetlabECO_AFL_FL_Sensor>
#   </sensor>
#   <sensor Channel="11" >
#     <!-- A/D voltage 5, Turbidity Meter, WET Labs, ECO-NTU -->
#     <TurbidityMeter SensorID="67" >
#       <SerialNumber>FLTURT-964</SerialNumber>
#       <CalibrationDate>2016-Nov-22</CalibrationDate>
#       <ScaleFactor>5.000000</ScaleFactor>
#       <!-- Dark output -->
#       <DarkVoltage>0.058000</DarkVoltage>
#     </TurbidityMeter>
#   </sensor>
#   <sensor Channel="12" >
#     <!-- A/D voltage 6, Altimeter -->
#     <AltimeterSensor SensorID="0" >
#       <SerialNumber>PSA916-40852</SerialNumber>
#       <CalibrationDate></CalibrationDate>
#       <ScaleFactor>15.000</ScaleFactor>
#       <Offset>0.000</Offset>
#     </AltimeterSensor>
#   </sensor>
#   <sensor Channel="13" >
#     <!-- A/D voltage 7, Free -->
#   </sensor>
#   <sensor Channel="14" >
#     <!-- SPAR voltage, Unavailable -->
#   </sensor>
#   <sensor Channel="15" >
#     <!-- SPAR voltage, SPAR/Surface Irradiance -->
#     <SPAR_Sensor SensorID="51" >
#       <SerialNumber>QSR2240-16500</SerialNumber>
#       <CalibrationDate>1 Aug 2017</CalibrationDate>
#       <ConversionFactor>1440.16650000</ConversionFactor>
#       <RatioMultiplier>1.00000000</RatioMultiplier>
#     </SPAR_Sensor>
#   </sensor>
# </Sensors>
# datcnv_date = Oct 16 2017 20:50:30, 7.23.2 [datcnv_vars = 9]
# datcnv_in = c:\data\ctd\at3901001.hex c:\data\ctd\at3901001.XMLCON
# datcnv_skipover = 0
# datcnv_ox_hysteresis_correction = yes
# wildedit_date = Oct 16 2017 20:50:35, 7.23.2
# wildedit_in = c:\data\ctd\PROCESS\at3901001.cnv
# wildedit_pass1_nstd = 2.0
# wildedit_pass2_nstd = 20.0
# wildedit_pass2_mindelta = 2.000e+000
# wildedit_npoint = 100
# wildedit_vars = prDM t090C t190C c0S/m c1S/m sbeox0V CStarTr0 flECO-AFL turbWETntu0
# wildedit_excl_bad_scans = yes
# alignctd_date = Oct 16 2017 20:50:38, 7.23.2
# alignctd_in = c:\data\ctd\PROCESS\at3901001.cnv
# alignctd_adv = c0S/m 0.073, c1S/m 0.073, sbeox0V 2.000                                                                                                                                                                             
# celltm_date = Oct 16 2017 20:50:41, 7.23.2
# celltm_in = c:\data\ctd\PROCESS\at3901001.cnv
# celltm_alpha = 0.0300, 0.0300
# celltm_tau = 7.0000, 7.0000
# celltm_temp_sensor_use_for_cond = primary, secondary
# Derive_date = Oct 16 2017 20:50:43, 7.23.2 [derive_vars = 8]
# Derive_in = c:\data\ctd\PROCESS\at3901001.cnv c:\data\ctd\at3901001.XMLCON
# derive_time_window_docdt = seconds: 2
# derive_ox_tau_correction = no
# binavg_date = Oct 16 2017 20:50:48, 7.23.2
# binavg_in = c:\data\ctd\PROCESS\at3901001.cnv
# binavg_bintype = meters
# binavg_binsize = 1
# binavg_excl_bad_scans = yes
# binavg_skipover = 0
# binavg_surface_bin = no, min = 1.000, max = 0.000, value = 0.000
# split_date = Oct 16 2017 20:50:52, 7.23.2
# split_in = c:\data\ctd\PROCESS\at3901001.cnv
# split_excl_bad_scans = yes
# file_type = ascii
*END*